Tank Gille par Arymi

We know a little bit about the manufacturer Arymi which has come into the world of vape. One thing is for sure that they have come China. From Shenzhen as always. And that Kangertech occupies the production of the material.  In the meantime, if you want to know more, test the sub ohm clearomiser Gille. A new ato-tank which has understood the potential we can obtain with a Notchcoil. Let’s go for testing the Gille by Arymi.

Intrigued and Roundness

The Gille Clearo comes in a small red and grey box with no less than 3 Notch coils. Firstly, we are intrigued by this small Notch coil not like any others: The cotton is replaceable. The ribbed part is very small. The coil is fragile.

The tank has some roundness and we question the 4 holes under the median tank. The drip tip which we can call the drip top, seeing its large size, in Delrin, and covers all the diameter of the  top-cap. This feels like a sub ohm,the heat and the production of vape. Bingo, our Notch Coil EOCC with a value of 0.20Ω.

Notch Coils Together

The Gille, strongly uses the new Notch Coil. A notch coil in Kanthal which does not need the temperature control in order for it to function correctly. The grooves of the Notch coil are situated at the superior part of the coil. One part of the grooves is fragile and demands a lot of precautions when installing. As the can be installed and re-installed a number of times. And this is the strong point of the Gille, there Is the possibility of replacing the cotton fiber and prolonging the duration of life of the coil. You can change the coil when it has been completely used.

Changing the cotton of the Notch Coil is child’s play. You can put in a tuft of fiber, not to packed and not too dispersed. It must be irrigated with liquid at all times. You can cut any excess fiber which is not necessary.

Warning: Priming

In the box there is a small yellow paper which explains the priming, its capital. While the coil is being installed in the lodging, you need a few droplets of liquid on the top and on the side as indicated step by step. If the fiber is dry near the level of the Notch Coil, the cotton will burn for 1 second! It’s the 0.20Ω which heats up very quickly. And well, the rendering and the production of vape are surprising, believe me. The Notch coil is advised for a range of utilisation from 20 watts to 40 watts and this is for real. Under 20 watts, nothing will happen. Above 40 watts, the render of liquid is not good. In between both, its good.

The tip of the Notch coil is very reactive like the airflow around the Notch Coil, the production of the vape is immediate. An excellent idea, is this airflow is not adjustable at all, but that does not matter, the flavours are at their meeting point.

Delrin Mandatory

It is true that the Gille heats up quite a lot. The reason for this is the large drip tip in Delrin. It is removable if you wish to replace it with a larger drip tip.

Under the drip tip is hidden the protection against liquids rising to the top. A tip which should be realized for all clearomiser and atomisers on the market. In effect, it bubbles with the Notch Coil, which is the most disagreeable by getting attacked with droplets of liquid?

Turbulent

This airflow is materialized by 4 tubes which directly nourishes the coil by air. It’s that simple. The vape is aired but we have seen worse. Which is also interesting the tubes are kept away from the liquid. The liquid does not leak with the airflow of the Gille. One point to particularly appreciate.

This does not signify that the Gille is not completely “leak-free”. The horizontal position is not ideal for the box.  It is advised not to place the Gille flat. The liquid oozes from cotton and escapes from the via the drip tip. A detail to be regulated by the service by the clearomiser.

And like this, Is more clear? 

Rocket and Instructions.

I did say that this Gille tank is particularly good at its job with the sub ohm, but with the condition to use it well.

Consider the Gille like a rocket with 4 stages. Starting from bottom to top: We have the 3ml Pyrex Tank. Above we find 4 turbulent airflows. At the 3^rd stage, is situated the part where you need to unscrew for filling in the e-liquid. On the Gille, the liquid is poured into the center of the clearomiser. Last step, we find the top cap and the drip tip which can changed. This is a typical installation which is similar to the Cubis.

And finally, like in said, the Gille has a vape which is strong. Many regret not having the possibility to vape above 40 watts with risking the of coil being martyred. At least, the Gille does not need to have a 200-watt box to have a good vape. This clearo Gille d’Arymi is therefore an excellent surprise and Arymi have made it original and practical. For a reasonable price we have concurrence with the Cleito from Aspire. We are waiting the next from Arymi, Next being in the form of a box.

Bonus: The next product from Arymi.

Box M1 and Pro One by Arymi