Lapin Original concentrate - Solubarôme
-
Shop's favorite
1,10 €
Unicorn Graduated Bottle - 50ml
The Unicorn 50ml graduated bottle allows you to transport an important quantity of e-liquid but also allows your to... -
Shop's favorite
1,00 €
Booster Born To Diy 10 ml 50/50
With the Booster Born To DIY, benefit with a base of 10ml with a dosage of 20mg/ml of nicotine for your DIY...- Nicotine rate 20 mg
- Bottle of 10 ml
-
Shop's favorite
100% Végétal
9,90 €
1L Base 50/50 - Born To Diy
With the 1L Base 0mg Born To DIY Le Petit Vapoteur , manufactures this e-liquid available for all. The ...- Nicotine rate 0 mg
- Bottle of 1L
More details on this product
"Lapin Original" concentrate from Solubarôme
Concentrate flavour especially made for e-liquids.
Solubarôme flavour, ready to use for your DIY e-liquids. Sugar-free, diacetyl-free and colorant-free.
Dosage:
There are 2 ways to dose the concentrates:
- Number of drops
- In % and then in milliliter
You need approximatively 5% to 10% (between 15 and 30 drops) of Solubarôme concentrate in an e-liquid.
You need to know that 1ml of concentrate equals 30 drops. If you need to put 10% of concentrate in the base, then you will need 10ml for 100ml, so 1 ml of concentrate, i.e. 30 drops for 10ml.
Features:
- Drop by drop 10 ml flask
- Natural and artificial flavours
- Glycol propylene
- Vegetal glycerine
- CEE standard
- Dosage from 5 to 10% upon the flavors
Storage:
Stored between 4 and 16°C, this concentrate can be stored, at the minimum, 1 year in its original packaging.
In compliance with the regulation 1334/2008/CEE.
Ripening:
- Tobacco type concentrate - The Fuu: minimum ripening of 15 days, even several weeks.
- Other concentrates - The Fuu: minimum ripening of 48 hours.
Make your own juice:
Ingredients:
- A ready-to-use base.
- One or many concentrates
- Optional: one additive (+/- sweet, +/- acid, balancing, sweetner…).
Equipment:
- A 10 or 30 ml syringe for the bases
- A smaller syringe for the 1ml concentrate
- Plastic or glass flasks (5ml/10ml/30ml) to make your mixes
- Latex gloves
- Safety goggles
Preparation:
- WASH YOUR HANDS, WORK FAR FROM CHILDREN, ON A CLEAN WORK SURFACE
- Using a syringe or a pipette, fill up an empty flask with your ready-to-use base (to make 10ml of e-liquid: pour 8 ml of base, the remaining +/- 2 ml will be filled up by concentrates and additives).
- The base, containing nicotine, must be handled with caution. We recommend using protective gloves and safety goggles for maximum security.
- Shake the concentrate flasks before use.
- Add some drops of concentrate (Check dosage on the product sheet).
- Option: add one or several additives.
- Energetically shake 10 to 20 seconds and let still for ripening the concentrates.
- Wash again your hands, clean your equipment and your work surface.
- Note your recipe to make it later or to share it.
Ripening:
Ripening is an unavoidable step: it is the time to develop the flavours of a juice preparation. Indeed, the concentrate is not immediately all flavourful, you need:
- 15 days minimum, even several weeks, for Tobacco type concentrates
- A minimum of 48 hours for other concentrates.
For an optimum rendering, the flask must be well shaken when the mix is done, and every day to well release the flavour.
Keep in mind that the ripening time will change upon the base used. The more important the vegetal glycerine level is, longer the ripening is.
Tasting:
When the ripening phase is over, your e-liquid can be tasted. If you find it too light, you can add a few drops and let it still for at least 48 hours. On the contrary, if your e-liquid is too strong, you can diluate it by adding base.
- Too strong = you must diluate by adding more base
- Too light = you add a few drops of concentrate
Recommendation:
- Start with only one concentrate before thinking of a mix of various concentrates.
- For additives (optional), remain in the 1 to 3% proportion of your base + concentrates, additives being most of the time very powerful.
- Label your mixes (concentrates, dosage, nicotine level, production date).
- Make your new recipies in 10 ml flasks, but in low capacity (5 ml) to enable possible base or concentrate readjustments.
- Don't be careless about the ripening phase. To lower the waiting time, you can add 1 or 2 drops of white vinegar to the mix, or open the flask for a few hours once in a while to stimulate the oxydation.
Opinions of users
Avis soumis à un contrôle
?
- Pour plus d’informations sur les caractéristiques du contrôle des avis et la possibilité de contacter l’auteur de l’avis, merci de consulter nos CGU
- Aucune contrepartie n’a été fournie en échange des avis
- Les avis sont publiés et conservés pendant une durée de cinq ans
- Les avis ne sont pas modifiables : si un client souhaite modifier son avis, il doit contacter Avis Vérifiés afin de supprimer l’avis existant, et en publier un nouveau
- Les motifs de suppression des avis sont disponibles ici
- S. Sascha
- le 03/12/2024
-
5/5
- G. Elodie
- le 19/11/2024
-
4/5
- K. Bachir
- le 03/04/2024
-
3/5
- P. Philippe
- le 25/01/2024
-
4/5
- A. Anonymous
- le 06/01/2024
-
5/5
- A. Etienne
- le 30/11/2023
-
5/5
- L. Catherine
- le 11/11/2023
-
5/5
- C. Jean François
- le 04/10/2023
-
5/5
- G. Anthony
- le 25/08/2023
-
5/5
- A. Etienne
- le 01/08/2023
-
5/5
Questions/réponses des clients
Vous souhaitez poser une question ?
Un de nos experts ou de nos clients vous répondra.