DotMTL Dotmod

High End
You found cheaper on another website ?
- +
49,90 €

The dotMTL Atomiser is a reconstructable which has a diameter of 22mm made by Dotmod. The first RTA of the amercian fabricant proposes a tight vape (Mouth to Lung).  All plays on the level of the airflow, precise and well thought of. Situated at the nase of tank , it does however have 3 different setting completed with a rotating ring. All to please vapers of indirect inhaling. 

The dotMTL RTA plate is made for coils in mono-coil of a small diameter, even if it possible to install the most imposing coils. Dotmod have had a good idea to re-utilise the same clamp system for the fixaion of the coil which handles large manipulations. 

The dotMTL finally proposes perfect finishes and a design which will take your breath away. Customisable, it proposes 2 types of reservoirs in 3ml and 2 drip tips which is entirely adapted for your taste. 

The dotMTL is made by Dotmod.

Height 46 mm
Diameter 22 mm
Capacity 3 ml
Type of Vape MTL
Worktop/Plate Clamp
Assembly Mono Coil


Présentation du DotMTL Dotmod

A real reference in the small world of atomisers and top of the range drippers. Dotmod have decided to attack this year a diiferent type of vape which the American manufacturers have not yet explored. The dotMTL is the first RTA of the brand which orientates towards vape in indirect inhaling (MTL). A good way to complete the loop. 

The dotMTL RTA is an atomier which is 22mm in diameter, elegant which does not detonate the range of Dotmod. It proposes to begin with a magnificent bell in Pyrex which can be replaced with a Stainless Steel Tank. Under the bell, you will discover a reduced atomisation chamber (MTL) and a clamp plate for the assemblies in mono-coil. The principal innovation of the dotMTL is the airflow system which is particularly ingenious and precise which offers a tight vape and full of flavours. 

Association of the DotMTL Dotmod with the Dotbox 200W Dotmod

Typically Dotmod !

Finitions du DotMTL Dotmod

No doubt, the dotMTL atomiser is designed by Dotmod. You will find in effect the exceptional finish as the manufacturer has taste for design; More compact with the a diameter of 222mm, the dotMTL is marked by its magnificent ball in Pyrex which closes the reconstructable. 

It can be replaced with a second bell 'complete" in Stainless Steel which radically modifies the design of the atomiser. More solid, the second tank is less practical and renders difficult the inspection for the level of e liquid. Note: you can associate the bell with 2 different drip tips. One in Ultem and one in Delrin. 

Drip tips du DotMTL Dotmod

 Simple Filling

On the dotMTL atomiser all has been though of to make life easy. This passes by a simple filling system and practical by the top of the tank. You can access this by unscrewing the drip tip of the dotMTL and slide the tip of the bottle into the opening as seen above in the photo. 

The 2 reservoirs of the reconstructable can each welcome 3ml in e liquid, which offers good autonomy, especially in Indirect Inhaling.

réservoirs du DotMTL Dotmod

Precise MTL Airflow

Airflow du DotMTL Dotmod

The MTL Atomiser is recognised before all, the settings it proposes. With this point, Dotmod has not skimped by any means. There exisits no less than 3 different settings for the arrival of air which you can find on the plate, which is also numbered (under the coil and on top of the coil).

The settings are effectuated once the dotMTL is unscrewed. You can therefore access the "Airflow Control" which can be placed on the right or the left. In function with the 510 pin utilised, you can obtain a different pull. 

  • Select on the right + full 510 pin : airflow on front of the coil
  • Select on the left + 510 pin of the base(pierced) : airflow under the coil
  • Select on the right + 510 pin of the de base (pierced) : airflows front and under the coil

Cherry on the cake, the rotating ring is situated on the base of the dotMTL RTA allowing you to complete the setting and obtain the perfect pull. 

airflows du DotMTL Dotmod

Clampled Plate

Plateau du DotMTL Dotmod

To finish, the magnificent plate of the dotMTL Atomiser. A clamp plate made for the utilisation of simple coil. Somewhat spacious, it allows you to use complex resistive wires of a meduim size, even if it is not really made for this. On the plate side, two channels can welcome your cotton wicks. 

The mini format of the atomisation chamber allows you to concentrate on flavours to offer you an experience of vape loyal to the best drippers of Dotmod. 

Features of the dotMTL Dotmod :

Height 46 mm Type of Plate Clamp
Diameter 22 mm Type of Assembly Simple coil
Material Anodised Aluminium  Drip-Tip  Owner

The dotMTL Atomiser is made by Dotmod.

The dotMTL RTA is delivered with:

Contenu du DotMTL Dotmod

  • 1 dotMTL
  • 1 Metallic Tank
  • 1 Supplementary 510 Pin
  • 1 Supplementary Drip Tip
  • 1 Flat Screwdriver
  • 1 Detached Pieces Kit

Discover the Packaging with the dotMTL

Packaging du DotMTL Dotmod

Product Reviews
  • Number of Reviews : 38
  • Average Grade : 4.1 /5
  • A. Fawzi
  •  the 04/07/2019
  • 3/5
le drip tip propriétaire qui gâche le savoir faire dotmod je suis déçue.
  • M. Marie
  •  the 01/07/2019
  • 4/5
Top !!! Zéro fuite ! Un jeu d’enfant !!! Par contre, le « pyrex » c’est du plastique. C’est moins fragile, mais je m’y attendais pas.
  • G. Régis
  •  the 14/06/2019
  • 5/5
Après un bon mois d'utilisation, je le conseille fortement. J'étais un peu sceptique au début mais avec le temps vous verrez vous aurez du mal à vous en passer. Petit, élégant et avec un excellent rendu de saveur. Étant un amateur du mtl, il est le meilleur que j'ai pu tester.
  • D. Fadel
  •  the 12/06/2019
  • 5/5
Top je recommande
  • G. Smuczynski
  •  the 03/06/2019
  • 5/5
Je l ai en doré je le voulais en argent voilà c est fait
  • L. François
  •  the 29/05/2019
  • 4/5
Très élégant , mais mtl pur et dur ... vape bcp trop serrée à mon goût . Inutilisable pour moi qui vape plutôt aérien
  • J. Zedek
  •  the 22/05/2019
  • 5/5
  • D. François
  •  the 19/05/2019
  • 5/5
Bon produit
  • R. Pierre
  •  the 19/05/2019
  • 5/5
Au top
  • R. Nicolas
  •  the 17/05/2019
  • 4/5
Bon produit, les finitions sont tops, c'est un bon MTL. Facile à cotonner pour commencer dans le reconstructible.
More reviews...