Profile Unity RTA Atomiser - Wotofo

You found cheaper on another website ?
- +
29,90 €

The Profile Unity RTA by Wotofo proposes an alternative to classic atomisers with the use of a coil in mesh instead of the usual coils. The assembly plate of the Profile Unity will allow you to install a pre-cut mesh slat which has a value of 0.13 ohm. 

With the Profile Unity RTA, the sheet nexMesh Coil can be replaced. Two nexMesh Coils of 0.13 ohm are supplied with the Profile Unity Atomiser. This mesh slat is made by OFRF and are available as accessories. 

The Profile Unity RTA also has a beautiful Atomiser of 25mm in diameter which has 2 possibilities with a capacity of e liquids: 3.5ml or 5ml. For you to choose. 

The Profile Unity is delivered with all the necessities to transform the atomiser. It also has a beautiful 810 drip tip in Resin. The drip tip is voluntarily thick and flare on the inside to avoid the leaking and projection of e liquids. 

The Profile Unity Atomiser proposes a mixture of flavours and vapor with the pleasure, gracious to the Mesh which is aired on each side. The flavours are very much presented gracious to the large cotton mesh which always remains soaked with e liquid.

The Profile Unity RTA is made by Wotofo. 

Height 48,5 mm
Diameter 25 mm
Capacity 3.5 ml / 5 ml
Type of Vape Direct Inhaling
Worktop/Plate Owner
Assembly Mesh Coil


The Profile Unity RTA by Wotofo is out of the box and proposes a vape with a resistive mesh instead of the usual coil. As well as the small mesh slat which is made by OFRF which screws quite easily onto the assembly plate. A good dose of Cotton under the mesh perfectly nourishes the atomiser which does not miss flavours. The nexMesh Coils have a value of 0.13 ohm and promises heat and impeccable vapor. 

The Profile Unity RTA has a diameter of 25mm, which has a capacity which can pass from 3.5ml to 5ml with 2 reservoirs and an adapter which is supplied in the pack. It has a filling from the top, a drip tip which has been studied to avoid leaking and projections of e liquid. The Profile Unity RTA has an aired pull, the airflow passes through each side of the mesh which has inclined openings to avoid the leaks. 

Two Profiles

If the pleasure is to short, it is simple enough to make it last. The Profile Unity RTA can also be transformed to pass the reservoir from 3.5ml to 5ml. By simply suing the long reservoir and adapter which is supplied. The Profile Unity has a simple filling, by unscrewing the top cap. You can find on the top cap, a 810 drip tip in thick resin for a comfortable contact. The drip tip has a thick design on the inside to stop the projections of e liquid. 

Mesh Coil

Already present with the Profile by Wotofo, the mesh makes it appearance in a RTA Version. The Profile Unity RTA Atomiser produces vapor and flavour with the help of a mesh slat made by OFRF. The mesh replaces the usual coil which installs easily with a screwdriver and a frame (supplied) for installation. With the help of these 2 tools, the mesh slat finds its place on the plate and remains fixed. An agleted cotton lace by Wotofo of 6mm in diameter finishes the work and assures the continued soaking of the mesh. 

The nexMesh Coil by OFRF is sized in 16.6mm x 8mmn has a value of 0.13 ohm and is constituted in Kanthal A1. It has a and ideal output power of 60 to 70 Watts. The atomiser does not forget the vapor. 

Of Air!

With the inclined passage of air, the Profile Unity RTA does not worry about leaking of e liquids. In effect 3 drives of air and more assures the aeration inside the atomiser. The 6 aerations are of course adjustable with the help of a rotating ring which allows you adjust the pull depending on your preference. 

Features of the Profile Unity RTA de Wotofo:

Height 48,5 mm Capacity 3,5 ml/5 ml
Diameter 25 mm Type of Plate Two Post for Mesh Coil
Drip-Tip 810 Coil Mesh Coil

The Profile Unity RTA Atomiser is made by Wotofo.

The Profile Unity RTA Atomiser is delivered with:

  • 1 Profile Unity
  • 1 5ml Reservoir
  • 1 Adapter for the 5 ml
  • 1 Frame
  • 1 Screwdriver
  • 2 nexMesh Coil in 0.13 ohm
  • 1 Agleted Cotton Lace in 6 mm
  • 1 Detached Pieces Kit
  • 1 utilisation Notice

Discover the Packaging for the Profile Unity RTA

Product Reviews
  • Number of Reviews : 55
  • Average Grade : 4.6 /5
  • M. Cédric
  •  the 11/07/2019
  • 5/5
Excellent ato
  • P. Joffrey
  •  the 07/07/2019
  • 5/5
Génial ! Le mesh revisité par Wotofo. Belle qualité pour un ato très abordable. La prise en main se fait en 2 minutes et la vidéo sur LPV donne de bons conseils pour la préparation et la pose du coton. Zéro fuite du premier coup. Très aérien, je le teste actuellement avec du DIY Fcukin’ Munkey et c’est le pied.
  • M. Maxime
  •  the 06/07/2019
  • 4/5
Reçu en bonne état
  • R. David
  •  the 05/07/2019
  • 4/5
premier atomiseur reconstructible , Pas évident, fuite par aérations
  • K. Denis
  •  the 03/07/2019
  • 4/5
Good product
  • D. Jean Charles
  •  the 01/07/2019
  • 4/5
PAS mal
  • A. Charlotte
  •  the 27/06/2019
  • 5/5
Le top pour moi sais le mieux
  • B. Reynald
  •  the 26/06/2019
  • 5/5
quelle saveur !!!!!!!!!
  • B. Fabrice
  •  the 23/06/2019
  • 5/5
excellent atomiseur très bon rendu de saveurs montage facile a faire vous êtes au top
  • B. Tahiri
  •  the 23/06/2019
  • 5/5
Super ato ! Belle production de vapeur et surtout trés bonne saveur
More reviews...