Nautilus 3SR Cleraromiser Aspire
Nautilus 3SR Cleraromiser Aspire
Here you will find Essential adapted to your
-
New option
10,90 €
Nautilus BVC Coils
BVC Coils 1.8 ohms, 1.6 ohms, 0.7 ohm, NS 1.8 ohms, 2S 0.7 ohm and 0.4 ohm (Bottom Vertical Coil) for...4.69/512825 Reviews
- Sold by x 5
- Name I power I Recommended VG Rate
Here you will find Coil adapted to your
-
9,50 €
Cosmo Coils - Vaptio
Compatible with the Cosmo and Tyro Coils and the Cosmo Clearomiser by Vaptio.4.74/51253 Reviews
- Sold by x 5
- Name I power I Recommended VG Rate
-
New option
10,90 €
Nautilus BVC Coils
BVC Coils 1.8 ohms, 1.6 ohms, 0.7 ohm, NS 1.8 ohms, 2S 0.7 ohm and 0.4 ohm (Bottom Vertical Coil) for...4.69/512825 Reviews
- Sold by x 5
- Name I power I Recommended VG Rate
Here you will find Drip Tip adapted to your
-
1,90 €
Drip Tip 510 to 810 Adapter
This adapter allows you to install the 810 standard drip tip on an atomiser wiith a 510 connection510.4.06/548 Reviews
- Colour
-
2,50 €
Ceramic Steel 510 Drip Tip
Add a touch of colour to your set up with a long drip tip composed on ceramic and steel.4.06/534 Reviews
- Colour
-
3,90 €
510 Ag+ 05 Drip Tip Hellvape
510 standard drip tip, special indirect inhaling, composed in Resin and Ag+.4.29/5121 Reviews
- Choice
-
0,90 €
Drip Tip Ego Aio
The Ego Aio Drip Tip is to replace or change the look of your Ego Aio. The drip tip Ego Aio is...4.41/51401 Reviews
- Colour
-
4,90 €
eRoll Slim 510 Drip Tip
Replacement drip tips for the eRoll Slim by Joyetech.4.58/519 Reviews
- Choice
- Sold by x 5
-
3,90 €
Resin Wide 510 Drip Tip
A standard 510 drip tip in coloured resin with a large output for more vapour.4.75/54 Reviews
- Colour
-
3,90 €
Resin / Metal 510 Drip Tip
A standard 510 drip tip in resin / metal, coloured, for a vape in RDL and MTL inhaling.4.5/52 Reviews
- Colour
-
3,90 €
Curved 510 Drip Tip
A standard 510 drip tip for a vape in semi direct and direct inhaling.3.67/53 Reviews
- Colour
-
3,90 €
Curved Light 510 Drip Tip
A 510 standard drip tip for a vape in direct inhaling. Resin coloured rip tip, random finishes.4.75/54 Reviews
- Colour
-
3,90 €
Straight Resin 510 Drip Tip
A resin coloured drip tip for a vape in indirect inhaling.4.88/58 Reviews
- Colour
-
3,90 €
Steel 14 mm 510 Drip Tip
A steel drip tip made for indirect inhaling and rendering of flavours, 510 standard.4/58 Reviews
- Colour
-
3,90 €
Straight Acrylic 510 Drip Tip
A 510 transparent drip tip for a vape in indirect inhaling.4.56/516 Reviews
- Colour
-
3,90 €
Acrylic/ Metal Short 510 Drip Tip
A drip tip with a heat sink, (disssipate heat) for a vape in indirect inhaling and rendering of flavours5/51 Reviews
- Colour
-
3,90 €
Acrylic / Metal Long 510 Drip Tip
A drip tip witha heat sink and long tip for a vape indirect inhaling and rendering of flavours5/54 Reviews
- Colour
-
3,90 €
Straight Acrylic 510 Drip Tip
Un drip tip en acrylique pour modifier le design des atomiseurs compatibles 510.4/53 Reviews
- Colour
-
3,90 €
Acrylic Long Classic 510 Drip Tip
A long chimney drip tip for the a rendering in MTL. Transparent acrylic drip tip.4.43/57 Reviews
- Colour
-
3,90 €
Aluminium 25 mm 510 Drip Tip
An aluminium drip tip with long tip for a vape in indirect inhaling and rendering of flavours.4.17/524 Reviews
- Colour
-
3,90 €
Aluminium Smile 510 Drip Tip
Ce drip tip au standard 510 possède une sortie de 13 mm qui offre un tirage semi-direct.5/52 Reviews
- Colour
-
3,90 €
Acrylic / Metal 16 mm 510 Drip Tip
A drip tip made in 2 materials for indirect inhaling. Compatible 510 atomisers.Waiting for your comments!- Colour
-
1,50 €
Fanssy 510 Drip Tip
A thin 510 drip tip for the Fanssy Pod Aspire.Waiting for your comments!- Colour Transparent
More details on this product
Nautilus 3SR Clearomiser Aspire

The Nautilus 3SR clearomiser by Aspire is a revisited version of the famous clearomiser combining performance and design. It offers a vape in MTL to RDL in quality, a comfortable capacity of 4 ml, a practical filling by sliding the top cap and remains compatible with all the Nautilus coils. New: a metal coating in grill form, varied colours to choose from, protection of the reservoir incase of shocks. The ideal choice for fans of flavours searching for reliability and elegance.

Association of the Nautilus 3SR Clearomiser Aspire with the First Box
Protection and design

The Nautilus 3SR has an aesthetic brilliance, with a modern and reinforced protection. The pyrex reservoir is surrounded by a metal grid with an elaborate pattern, clean finishes which brings an elegant touch, limiting the risk of breaking incase of any falls. A perfect balance between style and practicality, for a daily use in complete serenity.
A simple filling

The Nautilus 3SR keeps the top cap sliding system to effectuate the filling in complete security. This tool allows you to fill the reservoir by hand and avoid you putting it down or losing it. You can insert 4 ml of your preferred e liquid with a replacement tank if needed.
Filling of the Nautilus 3SR Clearomiser :

- Push the top cap at the level of the red arrow
- Fill the reservoir via the hole
- Close the top-cap.
- Wait a few minutes so the coil is completely soaked with e liquid before the first utilisation.
A precise airflow

The Nautilus 3SR is dedicated to MTL, but also offers several airflow settings, thanks to the ring situated at the base of the clearomiser. You will find 3 holes in several diameters which can be adapted to your convenience:0.8 mm, 1 mm, 1.2 mm, 1.5 mm, 2 mm, 2.5 mm and 3 mm. There are multiple options for a pull which can go up to strict MTL to open MTL, even RDL.
Compatible Nautilus BVC coils

The Nautilus 3SR is compatible with all the coils from the Nautilus range, offering a large choice of tight pulls (MTL) to an aired pull (RDL). Each type of coil can modify your experience, in terms of sensations and rendering of flavours. Practical, the automatic closing system for the arrival of e liquid allows you to replace the coil even if the reservoir is full of e liquid, without the risk of e liquids leaking.
The Nautilus 3SR Clearomiser is included with:
- 1 Nautilus Mesh Coil 1.8 Ω. To be used from 10 to 14 W. Tight pull adapted to high rates of nicotine.
- 1 x Nautilus 0.3 Ω Mesh Coil. To be used from 23 to 28 W. Restrictive direct pull for a polyvalent vape, full of flavours
Replacing the coil of the Nautilus 3SR Clearomiser:

- Unscrew the base of the Nautilus 3R
- Remove the used coils
- Install the new coil
- Screw back on the base to the reservoir
- Fill the reservoir with e liquid
- Wait at least 10 minutes so the coil is completely soaked with e liquids
Features of the Nautilus 3SR Aspire :
| Height | 53.5 mm | Capacity | 3.75 ml |
|---|---|---|---|
| Diameter | 24 mm | Coils | Nautilus BVC |
| Filling | From the top | Drip-tip | 510 |
The Nautilus 3SR Clearomiser is made by Aspire.
The Nautilus 3SR Clearomiser is included with:

- 1 Nautilus 3SR clearomiser
- 1 Nautilus Mesh Coil 1.8 Ω coil
- 1 Nautilus Mesh Coil 0.3 Ω
- 1 Pyrex de 4 ml
- 1 Sachet of joints
- 1 User notice
Discover the Packaging of the Nautilus 3SR

Opinions of users
Avis soumis à un contrôle
?
- Pour plus d’informations sur les caractéristiques du contrôle des avis et la possibilité de contacter l’auteur de l’avis, merci de consulter nos CGU
- Aucune contrepartie n’a été fournie en échange des avis
- Les avis sont publiés et conservés pendant une durée de cinq ans
- Les avis ne sont pas modifiables : si un client souhaite modifier son avis, il doit contacter Avis Vérifiés afin de supprimer l’avis existant, et en publier un nouveau
- Les motifs de suppression des avis sont disponibles ici
- H. Pierre
- le 02/09/2026
-
3/5
- M. Jean-Paul
- le 13/08/2026
-
5/5
- L. Christophe
- le 29/07/2026
-
5/5
- J. Michel Yves
- le 14/07/2026
-
5/5
- W. Jonathan
- le 16/04/2026
-
5/5
- K. Tracy
- le 06/04/2026
-
5/5
- D. Herve
- le 09/01/2026
-
5/5
- P. Laurent
- le 08/01/2026
-
5/5
- B. Karim
- le 03/01/2026
-
5/5
- F. Michel
- le 04/12/2025
-
5/5
More reviews...
More reviews...
Customer questions / answers
Do you wish to ask a question ?
One of our experts of customers will answer you