Z Nano MTL Clearomiser Geek Vape
Z Nano MTL Clearomiser Geek Vape
Here you will find Essential adapted to your
-
11,90 €
B Series Coil MTL Geek Vape
Coils in mesh compatible with the Z MTL clearomiser Geek Vape.4.75/532 Reviews
- Sold by x 5
- Name I power I Recommended VG Rate
Here you will find Coil adapted to your
-
11,90 €
B Series Coil MTL Geek Vape
Coils in mesh compatible with the Z MTL clearomiser Geek Vape.4.75/532 Reviews
- Sold by x 5
- Name I power I Recommended VG Rate
Here you will find Drip Tip adapted to your
-
1,90 €
Drip Tip 510 to 810 Adapter
This adapter allows you to install the 810 standard drip tip on an atomiser wiith a 510 connection510.4.06/548 Reviews
- Colour
-
2,50 €
Ceramic Steel 510 Drip Tip
Add a touch of colour to your set up with a long drip tip composed on ceramic and steel.4.06/534 Reviews
- Colour
-
3,90 €
510 Ag+ 05 Drip Tip Hellvape
510 standard drip tip, special indirect inhaling, composed in Resin and Ag+.4.29/5121 Reviews
- Choice
-
0,90 €
Drip Tip Ego Aio
The Ego Aio Drip Tip is to replace or change the look of your Ego Aio. The drip tip Ego Aio is...4.41/51401 Reviews
- Colour
-
4,90 €
eRoll Slim 510 Drip Tip
Replacement drip tips for the eRoll Slim by Joyetech.4.58/519 Reviews
- Choice
- Sold by x 5
-
3,90 €
Resin Wide 510 Drip Tip
A standard 510 drip tip in coloured resin with a large output for more vapour.4.75/54 Reviews
- Colour
-
3,90 €
Resin / Metal 510 Drip Tip
A standard 510 drip tip in resin / metal, coloured, for a vape in RDL and MTL inhaling.4.5/52 Reviews
- Colour
-
3,90 €
Curved 510 Drip Tip
A standard 510 drip tip for a vape in semi direct and direct inhaling.3.67/53 Reviews
- Colour
-
3,90 €
Curved Light 510 Drip Tip
A 510 standard drip tip for a vape in direct inhaling. Resin coloured rip tip, random finishes.4.75/54 Reviews
- Colour
-
3,90 €
Straight Resin 510 Drip Tip
A resin coloured drip tip for a vape in indirect inhaling.4.88/58 Reviews
- Colour
-
3,90 €
Steel 14 mm 510 Drip Tip
A steel drip tip made for indirect inhaling and rendering of flavours, 510 standard.4/58 Reviews
- Colour
-
3,90 €
Straight Acrylic 510 Drip Tip
A 510 transparent drip tip for a vape in indirect inhaling.4.56/516 Reviews
- Colour
-
3,90 €
Acrylic/ Metal Short 510 Drip Tip
A drip tip with a heat sink, (disssipate heat) for a vape in indirect inhaling and rendering of flavours5/51 Reviews
- Colour
-
3,90 €
Acrylic / Metal Long 510 Drip Tip
A drip tip witha heat sink and long tip for a vape indirect inhaling and rendering of flavours5/54 Reviews
- Colour
-
3,90 €
Straight Acrylic 510 Drip Tip
Un drip tip en acrylique pour modifier le design des atomiseurs compatibles 510.4/53 Reviews
- Colour
-
3,90 €
Acrylic Long Classic 510 Drip Tip
A long chimney drip tip for the a rendering in MTL. Transparent acrylic drip tip.4.43/57 Reviews
- Colour
-
3,90 €
Aluminium 25 mm 510 Drip Tip
An aluminium drip tip with long tip for a vape in indirect inhaling and rendering of flavours.4.17/524 Reviews
- Colour
-
3,90 €
Aluminium Smile 510 Drip Tip
Ce drip tip au standard 510 possède une sortie de 13 mm qui offre un tirage semi-direct.5/52 Reviews
- Colour
-
3,90 €
Acrylic / Metal 16 mm 510 Drip Tip
A drip tip made in 2 materials for indirect inhaling. Compatible 510 atomisers.Waiting for your comments!- Colour
-
1,50 €
Fanssy 510 Drip Tip
A thin 510 drip tip for the Fanssy Pod Aspire.Waiting for your comments!- Colour Transparent
More details on this product
Z Nano MTL Clearomiser Geek Vape

The Z Nano Clearomiser by Geek Vape comes back with a version entirely dedicated to MTL, ideal for amateurs of a tight vape and rich in flavours. With a generous diameter of 26.8 mm it offers excellent autonomy thanks to the 4 ml reservoir. The filling system is effectuated from the top and it conserves the anti-leaking mechanism system. The rotating airflow allows precise settings thanks to the micro-perforations, providing a very precise vape.
The Z Nano MTL is compatible with the B Series coils, from 0,8 Ω. Geek Vape have included 2 coils in the box: a 0,8 Ω and 1,2 Ω which can be adapted to many of your preferred e liquid and the power of your box.

A revisited design

The Z Nano MTL clearomiser carries a new look with a Pyrex tank covered with a metal armour to protect it. You will find a clean line of the Nano range but with a more sophisticated side. It is 26.8 mm in diameter and is larger than the Z Nano 2 which allows it to be adapted to the most imposing boxes. As usual with the Z series the airflows are situated on the superior part of the clearomiser to avoid the leaking of e liquids. There are 2 drip tips included which are MTL adapted with their thin and long design.
Filling from the top

The Z Nano %TL can be filled from the top, like the others from the same series but thanks to the sliding top cap which is more practical and without having to place it on the side. The superior part is hermetic to avoid any overflow of e liquid. There are 2 good filling holes and leaves plenty of room depending on the liquid bottle used. A mark is visible on the tank for minimum fill.
Deux haricots de bonne taille facilitent le remplissage et laisse une grande possibilité pour le choix du flacon utilisé. Une marque est visible sur le tank pour un remplissage minimum.
Filling of the Z Nano MTL :

- Push the top-cap
- Fill the reservoirs by the openings on the side of the reservoir (not in the centre)
- Close the top-cap
- Wait 10 to 15 minutes so the coulis completely primed with e liquid if it is the first utilisation
B MTL Coils

The Z Nano Tank MTL is compatible with all the B Series MTL coils. They are made in mesh which brings saturated flavours and precise dense vapour on all e liquids. You will have the choice between two types of B MTL coils:
- B MTL coil 0.8 ohm, to be used between 12 and 16 watts, for a MTL vape with a maximum rate of 50 % VG.
- B MTL coil 1.2 ohm, to be used between 8 and 12 watts, for a MTL vape with an inferior rate of 50 % VG.
Changing the coil of the Z Nano MTL :

- Unscrew the base from clearomiser
- Remove the coil by the hand or with the key included
- Insert the new coil between the tank shims
- Close the base of the clearomiser
Features of the Z Nano MTL Geek Vape :
| Height without drip-tip | 43.5 mm | Capacity | 4 ml |
|---|---|---|---|
| Base Diameter | 26.4 mm | Coils | B MTL |
| Material | Stainless steel / silica glass | Drip-tip | 510 |
The Z Nano MTL Clearomiser is made by Geek Vape.
The Z Nano MTL Cleartomiser is included with:

- 1 Z Nano MTL clearomiser
- 1 B Series de 0.8 Ω coil
- 1 B Series de 1.2 Ω coil
- 1 replacement tank
- 1 Sachet of changeable pieces
- 1 510 drip tip
- 1 User notice
Discover the Packaging of the Z Nano MTL Geek Vape

Opinions of users
Avis soumis à un contrôle
?
- Pour plus d’informations sur les caractéristiques du contrôle des avis et la possibilité de contacter l’auteur de l’avis, merci de consulter nos CGU
- Aucune contrepartie n’a été fournie en échange des avis
- Les avis sont publiés et conservés pendant une durée de cinq ans
- Les avis ne sont pas modifiables : si un client souhaite modifier son avis, il doit contacter Avis Vérifiés afin de supprimer l’avis existant, et en publier un nouveau
- Les motifs de suppression des avis sont disponibles ici
- R. Franz
- le 13/09/2026
-
4/5
- D. Stéphane
- le 21/08/2026
-
5/5
- M. Florent
- le 14/08/2026
-
5/5
- P. Wilfried
- le 16/07/2026
-
5/5
- A. Anonymous
- le 10/06/2026
-
5/5
- B. Claude
- le 04/05/2026
-
5/5
- G. Aurélie
- le 25/02/2026
-
5/5
- L. József
- le 14/11/2025
-
5/5
- B. Louis
- le 30/09/2025
-
5/5
- A. Anonymous
- le 13/09/2025
-
5/5
More reviews...
More reviews...
Customer questions / answers
Do you wish to ask a question ?
One of our experts of customers will answer you