Titan Clearomiser Titanide
Age verification
More details on this product
Titan Clearomiser Titanide
Titanide, French manufacturer specializes in high-end vaping materials, have decided to gratify you with a superb atomiser with irreproachable finishes as usual. The Titan, as the name indicates is a clearomiser of massive aspects with high aerobatics materials. Two appearances are available, the first in steel with a chrome aspect and the second more “classic” with a black mat sumptuous coating.
The Titan is easy to maintain with the top airflow which avoids untimely leaking. Each unscrewing mechanism of the clearomiser is made for the rendering of a simple vape. A quarter turn to unscrew the top cap, and the same for the base to replace the coil of the clearomiser, it’s as easy as that. With the Titan clearomiser you will find 2 coils in 0.2 and 0.4 Ω. The first offers a vape full of vapor and the second a pull which is a touch more restrictive, more “passe-partout”. Each coil is made in Mesh to bring remarkable reactivity, a maximum of flavours and beautiful vapor even with a low based power. Titanide proposes with the Titan a calm and powerful vape, all with a beautiful screen worthy to manufacturer.
Association of the Titan by Titanide with the mod One Bar Ambition Mods x R.S.S.
High-End
Titanide has pulled out all the stops with the new Titan clearomiser. A finish which will take your breath away with noble materials as usual. The French modder who has been officiating for 10 years now in the world of high-end vape has chosen Steel 304 for the body of the Titan. The clearomiser sized in mass, this finish is also presented on an internal bell. Two possibilities: a black mat finish with a beautiful effect or in original Steel which slams.
Compact and design
The Titan by Titanide is an atomiser in a relatively restrictive format. It has a height of 40 mm (without drip tip) which is ideal and avoids you from having a large kit. With 26mm in diameter it can adapted to several boxes and electronic mods, without forgetting the possibility of placing the clearomiser on meca tubes of the manufacturer thanks to the Re-Fuse V2 chipset which is integrated with several securities to avoid any clumsiness.
Choice of capacity
Titanide have decided to propose two different pyrex with the Titan clearomiser. The first (pre-installed) in a straight form which offers a beautiful capacity of 3.9ml. The bubble pyrex will please gourmet vapers with a increased capacity of 5.2ml.
The filling of the Titan is easy via the 2-bean hole shapes of a good size. They are accessible by effectuating a quarter turn on the top cap and allows you to insert most tips of e liquid bottles.
Filling of the Titan Clearomiser :
- Unscrew the top cap a quarter turn
- Pour in the e liquid by passing by the 2 bean shape holes
- Screw back on the top cap
Top Airflow
Titanide have decided for the Titan to affix the airflow on the upper part. The airflow is optimised for excellent rendering of flavourings with a passage in the coil which makes it more efficient. Asset and not the least, the top airflow allows you to avoid the leaking of e liquids which can happen with a classic arrival of air based on the bottom of the atomiser.
TITAN coils
The Titan clearomiser is used with the Titan coils, a beautiful way not to forget its name. The conception of the coils in Mesh offers a profusion of flavours and excellent reactivity. This mesh is also responsible for the beautiful production of vapor even with reduced power.
- Titan 0.2 Ω, for the utilisation with a direct pull between 50 and 80 W with good production of vapor.
- Titan 0.4 Ω, for the utilisation with a direct pull between 30 and 50 W with strong flavours.
Small subtility, the Titan is also compatible with the Z Series coils by Geek Vape, another way to make it more polyvalent.
Replacing the coils of the Titan by Titanide :
- Unscrew the base of the clearomiser quarter turn
- Remove the used coil with the tools included
- Install the new coil into the center of the reservoir
- Screw back on the base of the clearomiser and wait so the coil is completely soaked with e liquid if it is the first filling (10-15mins).
Features of the Titan Clearomiser :
| Height | 40 mm (without drip tip) | Capacity | 3.9 / 5.2 ml |
|---|---|---|---|
| Diameter | 26 mm | Coils | Titan / Z Series |
| Material | Steel 304, Gold Plated Brass, Delrin | Drip-tip | 810 |
The Titan Clearomiser is made in France by Titanide.
The Titan Clearomiser is included with:
- 1 Titan Clearomiser
- 1 Titan 0.2 Ω coil (pre-installed)
- 1 Titan 0.4 Ω coil
- 1 Pyrex bubble 5.2 ml
- 1 Changeable joints kit
- 1 User notice
Discover the Packaging of the Titan by Titanide
Opinions of users
Avis soumis à un contrôle
?
- Pour plus d’informations sur les caractéristiques du contrôle des avis et la possibilité de contacter l’auteur de l’avis, merci de consulter nos CGU
- Aucune contrepartie n’a été fournie en échange des avis
- Les avis sont publiés et conservés pendant une durée de cinq ans
- Les avis ne sont pas modifiables : si un client souhaite modifier son avis, il doit contacter Avis Vérifiés afin de supprimer l’avis existant, et en publier un nouveau
- Les motifs de suppression des avis sont disponibles ici
- P. Claud
- le 15/09/2026
-
5/5
- P. Vigreux
- le 25/08/2026
-
5/5
- A. Anonymous
- le 18/08/2026
-
5/5
- B. P
- le 26/11/2024
-
5/5
- M. P
- le 26/09/2024
-
5/5
- A. Anonymous
- le 30/08/2024
-
4/5
- A. Anonymous
- le 20/08/2024
-
5/5
- A. Anonymous
- le 21/05/2024
-
5/5
- A. Anonymous
- le 25/01/2024
-
3/5
- A. Anonymous
- le 19/01/2024
-
5/5
Customer questions / answers
Do you wish to ask a question ?
One of our experts of customers will answer you
Le Petit Vapoteur
Age verification
