Drag S3 Classic Pod Voopoo
Drag S3 Classic Pod Voopoo
Here you will find Essential adapted to your
-
Black Fairdays - Exclu Web
7,43 €
PnP X MTL Cartridges Voopoo
MTL cartridge for your Drag X2 and Drag S2 pods by Voopoo4.74/5100 Reviews
- Colour
- Sold by x 2
-
Black Fairdays - Exclu Web
7,43 €
PnP X DTL Cartridges Voopoo
DL cartridge for your Drag X2 and Drag S2 pods by Voopoo4.9/5105 Reviews
- Colour
- Sold by x 2
-
Black Fairdays - Exclu Web
7,72 €
PnP X Coils Voopoo
Performant coils, compatible with the PnP X DTL/MTL coils by Voopoo.4.78/5904 Reviews
- Sold by x 5
- Name I power I Recommended VG Rate
Here you will find Atomiser adapted to your
-
Black Fairdays - Exclu Web
22,43 €
Dead Rabbit MTL 2 RTA Atomiser Hellvape
Reconstructable atomiser dedicated to MTL with airflow pins, simple coil and adapted drip tip. 2 ml and 4 ml capacity.4.58/512 Reviews
- Colour
-
Black Fairdays - Exclu Web
111,75 €
Taifun GTR
A high-end atomiser made for indirect inhaling with a good choice of pulls. Mono Coil plate and 4 ml tank.4.77/553 Reviews
- Colour Metal
-
Black Fairdays - Exclu Web
74,25 €
Taifun GT One
A high-end atomiser, 23mm in diameter, can welcome up to 4.3ml in e liquid. Filling from the base.4.14/57 Reviews
- Colour Stainless Steel
-
Black Fairdays - Exclu Web
126,75 €
Taifun GX
An RDTA version revisited by the famous Taifun with mesh and wires.4.56/518 Reviews
- Choice Silver
-
Black Fairdays - Exclu Web
105,00 €
Corona V8 MTL SC Atomiser - Steampipes
MTL top coil atomiser 23mm in diameter with a Velocity plate which can hold up to 8.7ml in e liquid.4/56 Reviews
- Colour Metal
-
Black Fairdays - Exclu Web
111,75 €
Taifun GT 4 S
A more compact but also performant version of the RTA Taifun GT 44.57/57 Reviews
- Colour Metal
Here you will find Coil adapted to your
-
Black Fairdays - Exclu Web
7,43 €
PnP X MTL Cartridges Voopoo
MTL cartridge for your Drag X2 and Drag S2 pods by Voopoo4.74/5100 Reviews
- Colour
- Sold by x 2
-
Black Fairdays - Exclu Web
7,43 €
PnP X DTL Cartridges Voopoo
DL cartridge for your Drag X2 and Drag S2 pods by Voopoo4.9/5105 Reviews
- Colour
- Sold by x 2
-
Black Fairdays - Exclu Web
7,72 €
PnP X Coils Voopoo
Performant coils, compatible with the PnP X DTL/MTL coils by Voopoo.4.78/5904 Reviews
- Sold by x 5
- Name I power I Recommended VG Rate
More details on this product
DRAG S3 CLASSIC POD VOOPOO

Made for a vape in indirect inhaling (MTl), the Drag S3 Classic pod offers a vape in semi-direct inhaling but more energetic. Included with theMTL PnP X drip tip, the Drag S3 Classic pod remains compatible with all the PnP X coils by Voopoo. The strong points of the pod is autonomy in 3000 mAh with an interesting compact format for vaping everywhere.
The Classic version of the Drag S reconnects with the old colours and is modern with the chipset which handles the different vaping modes, Smart, RBA and Eco. The pod also allows you to personalise the screen with different themes and animations in a few clicks.
Voopoo has a practical and innovative Everest Lab switch. The capacitive button reacts to your fingertip to activate the pod. The Drag S3 Classic locks as soon as the finger is no longer in contact, ensuring the pod's operation. This switch avoids damaging the pod and coil with any accidental presses.
The Drag S3 Classic pod is included with the PnP X 0.6 Ω (18 - 23 watts ≈ 50% de VG) and PnP X 0.8 Ω (12 - 16 watts et ≤ 50 % de VG) coils. The cartridge is compatible with all the PnP X coils in 0.15 Ω to 1.0 Ω. It is also compatible with the PnP X DTL cartridge. The Drag S3 Pod has a maximum power of 60 watts. The integrated 3000 mAh battery has a recharge capacity of 5V/2A.
Who is the Drag S3 Classic by Voopoo for ?

The Drag S3 Classic pod is for vapers who are in search of versatility to ensure a vape from MTL to RDL without any difficulties and with a maximum output power of 60 watts. A strong point of the pod being compatible with all PnP X products. It also addresses vapers in indirect inhaling in search of a compact electronic cigarette which has good autonomy in a battery as well as in e liquid.
Switch Everest Lab

It contains a compact 3000 mAh battery. The Drag S3 Classic pod conserves the practical format with a size which allows you to carry it with you. The armor is in zinc alloys and has the PU leather coating around the handle. A coating which has different engravings depending on the colour. The pod has two setting buttons, a TFT 0.96-inch coloured screen and benefits for the first time a switch signed by Everest Lab. A capacitive switch which locks the pod when it is not in contact with the hand.
A pod, three modes

There are three modes available in the Drag S3 Classic depending on your preference. The Smart mode activates to make sure that the coil does not get damaged with a high power. The RBA mod allows you to use the power in watts from 5 - 60 watts as usual, and to finish the Eco mode to economise the battery. The Drag S3 also has the possibility to personalise the TFT coloured screen with several themes and animations.
3000 mAh

The Drag S3 Classic offers a maximum output power of 60 watts with an integrated battery of 3000 mAh. This battery can be recharged via USB-C with the cable included and capacity of 5V/2A. It is advised to use a charger adapted to this capacity.
PnP X MTL

With an aeration from the top, the Pnp X MTL preserves the pod from any accidental leaks. The aeration is entirely adjustable so you can choose your type of pull, type or open. The cartridge can hold up to 5 ml of liquid with a filling from the side. The carriage is compatible with all the PnP X coils.
Filling of the Drag X3 Classic Voopoo :

- Remove the PnP X cartridge from the pod
- Delicately remove the cap from the base of the cartridge
- Fill the reservoir
- Close the reservoir and install the cartridge to the pod
PnP Xcoils

All the PnP X coils are compatible with the Drag S3 Classic pod. The coils ranging from 0.15 Ω and 1.0 Ω are available separately depending on your type of vape. The coils have four joints to guarantee the perfect sealing. There are two coils included with the Drag S3:
- PnP X 0.6 Ω for a vape in RDL and MTL. With a power between 18 and 23 watts. With e liquids around 50 % in VG and less are recommended.
- Pnp X 0.8 Ω pour une vape en MTL. Avec une puissance entre 12 et 16 watts et des e liquides avec 50 % maximum de VG sont conseillés.
Replacing the coil of the Drag S3 Classic :

- The PnP X cartridge must be empty.
- Remove the cartridge from the Drag X3 Classic.
- Remove the coil from the cartridge.
- Insert the new coil into the reservoir
- Wait at least 15 minutes so the coil is primed with e liquid
Features of the Drag S3 Classic Voopoo :

| Dimensions | 124.25 x 28 x 33 mm | Autonomy | 3000 mAh |
|---|---|---|---|
| Range of Coils | 0.1 Ω - 3.0 Ω | Power | 5 - 60 W |
| Charging capacity | 5V/2A | Capacity | 5 ml |
The Drag S3 Classic Pod is made by Voopoo.
The Drag S3 Classic Pod is included with :

- 1 Drag S3 Classic Pod
- 1 PnP X MTL cartridge
- 1 PnP X 0.6 Ω coil
- 1 PnP X 0.8 Ω coil
- 1 510 drip tip
- 1 USB-C cable
- 1 User notice
Discover the Packaging of the Drag S3 Classic Voopoo

Customer questions / answers
Do you wish to ask a question ?
One of our experts of customers will answer you