dotPod Max Lite dotMod
Age verification
More details on this product
DOTPOD MAX LITE DOTMOD
The dotPod Max Lite is an electronic cigarette made for vaping in semi-direct inhaling (RDL) with the dotPod Max 0,6 Ω which has a capacity of 5 m. This Lite version of the dotPod Max is made in transparent and resistive polycarbonate. The pod also benefits with 8 integrated LED’s, dynamic and it illuminates the pod during inhalation. The pod is available in 7 different colours and it is possible to choose the dominant colour of the LED or in multicolours.
The dotPod Max Lite also has an OLED 0.87-inch screen with three themes to personalise the pod, Volt, Core and Mech. The pod can deliver an output power of 60W depending on the coil used. With the dotPod Max 0.6 Ω cartridge you can have a power from 5 to 24 watts, the dotPod Max Lite always respects the power accepted by the coil without damaging it.
Simple to maintain, the menu of the ditPod Max Lite works with the unique button, the famous engraved Dotmod switch. It is possible to modify the theme of the screen, LED colours, power in watts. The dotPod Max Lite functions with a rechargeable battery (USB cable included) with an autonomy of 210 mAh and a rapid recharge of 2A.
The dotPod Max cartridge has a 5 ml reservoir and easy filling from the top. The aeration can be adjusted via the cartridge with a lever which is situated under the reservoir. The dotPod Max Lite is compatible with the 0.3 Ω, 0.7 Ω and 0.9 Ω dotCoils aswell as the dotPod 1.0 Ω and 0.6 Ω.cartridges.
Who is the dotPod Max Lite by Dotmod for ?
The dotPod Max Lite addresses fans of the Dotmod manufacturer but also vapers who appreciate a vape in semi-direct inhaling and it will also please those who love an original electronic cigarette. With the dotPod Max Lite the light is the star of the show with 8 LED’s installed in the pod. It can finally meet autonomy needs with a cartridge with good capacity and a rechargeable battery of more than 200 mAh. The dotPod Max Lite also has the advantage of being versatile thanks to its cartridges for both indirect and direct inhalation enthusiasts.
Max Lite
With the PC conception, polycarbonate, the dotPod Max Lite is also shock resistant aswell as transparent. A transparency which allows you to choose several colours with the metal casing and there are eight LED’s which light the pod. The typical design of the dotPod Max allows the placement of the cartridge which has a large capacity and a battery full of autonomy. There is a screen which displays all the important information and of course the gold engraved Dotmod switch.
Screen & LED’s
The dotPod Max Lite has an OLED screen in 0.87-inches and three graphic interfaces to choose from in the menu. This menu is accessible with the Dotmod button and with a series of successive presses allows you to vary the power of the pod, consult and reset the pull counter but you can also regulate the eight LED’s of the dotPod MaxLite. It is possible to choose the animation colour with the bonus multi-coloured mode.
- 3 presses : adjust the power in watts
- 4 presses : locking/unlocking of the pod
- 5 presses : start/stop of the pod
- 6 presses : access the main menu on the pod
2100 mAh
With the battery you can benefit with an autonomy of 2100 mAh, rechargeable in 5V/2A (cable not included). The dotPod Max Lite has an output power of 5 to 60 watts depending on the cartridge installed. The dotPod Max Lite respects the range of power for each coil. The 0.6 Ω cartridge included can be used from 5 to 24 watts.
dotPod cartridge
Dotmod proposes the dotPod Max 0.6 Ω cartridge. The empty cartridges without coils remain compatible with the dotPof Max Lite. Each cartridge offers a capacity of 5 ml and a practical filling from the top without having to remove the cartridge from the pod. The airflow is adjusted directly from the bottom of the cartridge for simple and clean use.
The dotPod Max Lite is compatible with the 0.3 Ω, 0.7 Ω and 0.9 Ω dotCoils (uniquely). It is also compatible with the dotPod 1.0 Ω and 0.6 Ω.cartridges
Filling of the dotPod cartridge :
- Push the cap towards the back of the reservoir
- Perform the filling
- Close the reservoir
- Replace the cartridge to the dotPod Max Lite and wait 5 minutes if it is the first utilisation of a new coil
Features of the dotPod Max Dotmod Lite :
| Dimensions | 94.5 x 22.5 x 43 mm | Autonomy | 2100 mAh |
|---|---|---|---|
| Material | Aluminium alloys/PC/PCTG | Power | 5 W - 60 W |
| Capacity | 5 ml | Cartridge | dotPod Max |
The dotPod Max Lite is included with:
- 1 dotPod Max Lite
- 1 dotPod Max 0.6 Ω cartridge
- 1 User notice
Discover the Packaging of the dotPod Max Lite Dotmod
Opinions of users
Avis soumis à un contrôle
?
- Pour plus d’informations sur les caractéristiques du contrôle des avis et la possibilité de contacter l’auteur de l’avis, merci de consulter nos CGU
- Aucune contrepartie n’a été fournie en échange des avis
- Les avis sont publiés et conservés pendant une durée de cinq ans
- Les avis ne sont pas modifiables : si un client souhaite modifier son avis, il doit contacter Avis Vérifiés afin de supprimer l’avis existant, et en publier un nouveau
- Les motifs de suppression des avis sont disponibles ici
- P. Denis
- le 13/08/2026
-
5/5
- A. Anonymous
- le 08/08/2026
-
5/5
- A. Anonymous
- le 06/08/2026
-
1/5
- N. Jacques
- le 21/07/2026
-
5/5
- M. Peggy
- le 21/07/2026
-
5/5
- D. François
- le 17/07/2026
-
5/5
- V. Carlo
- le 16/07/2026
-
5/5
Customer questions / answers
Do you wish to ask a question ?
One of our experts of customers will answer you
Le Petit Vapoteur
Age verification
