Coolfire P60 Innokin
Age verification
More details on this product
COOLFIRE P60 INNOKIN
With a rectangular format and thin figure, the Coolfire P60 is a polyvalent electronic cigarette which proposes a vape in direct inhaling (RDL) and indirect (MTL). The Coolfire P6+0 proposes autonomy for a longer vape, a 3200 mAh battery and 4 ml cartridge. The Coolfire P60 pod proposes the utilisation of the PZP Max coils with cartridges included (MTL and RDL). The PZP Max coils in 0.4 Ω (40 W - 60 W) and PZP Max 0.8 Ω (12 W - 14 W) are included with the Coolfire P60 pod. The pod is also compatible with the PZP Max coils in 0.6 Ω (18 W - 23 W) which are separately available. The Coolfire P60 allows you to vape with a large choice of e liquids.
The pod offers a simplified vaping experience with an automatic pull and accessible settings: varied watts, from 6 to 60 watts. The Coolfire P60 pod displays all the essential information with the monochrome 0.69-inch screen, economical and readable. The Coolfire P60 allows you to regulate the airflow depending on your preference. The control is carried out at the front of the cartridge. Filling is also simplified, with access to the reservoir on the top of the cartridge.
The Coolfire P60 pod is not compatible with the PZP Max coils less than 0.4 Ω.
To whom does the Coolfire P60 Pod address ?
For a versatile vape which can pass from MTL to RDL, to have excellent autonomy and a longer vape, the Coolfire P60 pod is an interesting choice. It is also convenient for vapers who prefer a utilisation with replaceable coils in the empty cartridge. The Coolfire P60 pod addresses pod fans who have this particular design, rectangular and thin.
Finishes and hold in the hand
The Coolfire P60 pod is made in zinc alloys and is one part covered in polyurethane. This soft imitation leather hugs the metal edges of the pod to provide a comfortable grip in the hand. It has a thin shape so the pod can slide in your pocket. The cartridge is composed in PCTG which remains robust and compatible with all e liquids. The pod also disposes of an interrupter to lock the pod when it is not being used.
60 watts
From 6 to 60 watts, the chipset of the Coolfire P60 always has a stable power no matter which coil is being used and the type of vape. The pod disposes of an OLED 0.69-inch screen to display all of the essential information (value of the coil, pull counter, etc). A monochrome and economic screen which uses little battery capacity.
3200 mah
The strong point of the Coolfire P60 is of course the high capacity battery which allows a longer vape including a demanding vape in direct inhaling. The battery remains of a small independent size. It can be recharged in USB-C with a capacity of 2A. The cable is included.
P60 cartridge
There are two P60 cartridges included with the Coolfire P60. A cartridge for a vape in MTL (blue joints) which can be used with the PZP Max 0.8 Ω coil and brings a tight pull. The cartridge for a DL pull (black joints) can be used with the PZP Max 0.4 Ω coil for an aired pull. Each cartridge has a capacity of 4 ml and the filling is effectuated from the top, without any disassembly of the cartridge. The aeration adjustment is also done from the cartridge.
Filling of the P60 cartridge:
- Delicately remove the silicone from the cartridge
- Fill the reservoir and close the reservoir
- Close the silicone cap.
- Wait a few minutes so the coil is primed with e liquid if it is a new coil.
PZP Max coils
The Coolfire P60 Pod is included with the PZ Max coils in 0.8 Ω and 0.4 Ω. It is also compatible with the PZP Max coil in 0.6 Ω, available separately. The Coolfore P60 is not compatible with the PZP Max coils less than 0.4 Ω.
- PZP Max 0.4 Ω, to be used between 40 and 60 watts, for a vape in direct inhaling and e liquids with a high rate of VG.
- PZP Max 0.8 Ω, to be used between 12 and 14 watts, for a vape in indirect inhaling and e liquids with a low rate of VG.
Replacing the coil of the PZP Max with the Coolfire P60 Pod :
- Remove the cartridge from the Coolfire P60
- Remove the used coil.
- Insert into the cartridge the new PZP Max coil
- Install the cartridge to the pod and effectuate the filling
Features of the Coolfire P60 Innokin :
| Dimensions | 113.6 x 22.65 x 33.99 mm | Power | 6 W - 60 W |
|---|---|---|---|
| Material | zinc alloys/polyurethane/PCTG | Autonomy | 3200 mAh |
| Capacity | 4 ml | Coils | PZP Max |
The Coolfire P60 Pod is made by Innokin.
The Coolfire P60 Pod is included with:
- 1 Coolfire P60 Pod
- 1 P60 MTL cartridge
- 1 P60 DL cartridge
- 1 PZP Max 0.4 Ω coil
- 1 PZP Max 0.8 Ω coil
- 1 USB-C cable
- 1 User notice
Discover the Packaging of the Coolfire P60 Innokin
Opinions of users
Avis soumis à un contrôle
?
- Pour plus d’informations sur les caractéristiques du contrôle des avis et la possibilité de contacter l’auteur de l’avis, merci de consulter nos CGU
- Aucune contrepartie n’a été fournie en échange des avis
- Les avis sont publiés et conservés pendant une durée de cinq ans
- Les avis ne sont pas modifiables : si un client souhaite modifier son avis, il doit contacter Avis Vérifiés afin de supprimer l’avis existant, et en publier un nouveau
- Les motifs de suppression des avis sont disponibles ici
- C. Christine
- le 05/07/2026
-
2/5
- H. Christine
- le 04/07/2026
-
5/5
- R. Franck
- le 02/07/2026
-
5/5
- R. Thomas
- le 20/12/2025
-
4/5
- M. Brigitte
- le 13/09/2025
-
5/5
Customer questions / answers
Do you wish to ask a question ?
One of our experts of customers will answer you
Le Petit Vapoteur
Age verification
