Bushido V3 RDA BP Mods

14
Reviews
32,90 €
0%
Add to
my list
A question about this product ?
Share
this product
Je partage ce produit

Vous pouvez maintenant coller l'url de la page

-18 If you do not smoke, do not vape
32,90 €
next available
Notify me when available
Your advantages
If you buythis product
1€ offered for every 10 € of purchase
3€ offered with your next purchase
Loyalty points for this product : 3
Loyalty points already in your cart : 0
Loyalty voucher amount* : 3,00 €
(*) Available on your next order
For standard delivery is offered ! For express delivery is offered from 45,90 €
Nous expédions votre commande en moins de 24h !
3x Only 9.70€ left to pay 3x free of charge

The Bushido V3 RDA manufacturers BP Mods is an innovative atomiser made for amateurs of flavours, which remains simple to use and of excellent quality fabrication, the Bushido V3 is a small reconstructable RDA atomiser with an original conception of pure design.

With a diameter of 22mm, the Bushido is compact and practical. The assembly plate is made to welcome simple coils, easy and rapid. The originality of the dripper can be found in the top cap which allows practical filling. The drip tip is compatible 510 for the utilisation in tight pull with good restitution of flavours and can be used with the BF pin included.

The metallic ring is surrounds the Bushido V3 and brushed finish which gives it a proud allure and an exceptional atomiser for demanding vapers.

The Bushido V3 RDA is made by BP Mods.

Features
Height 33 mm
Diameter 22 mm
Thread 510 / BF
Material Stainless Steel
Type of Vape DL / RDL
Assembly Single Coil

Bushido V3 RDA

Présentation du Bushido V3 RDA

BP Mods delivers a quality RDA with the Bushido V3, compact with a very good rendering of flavours. The dripper is 22mm in diameter compatible BF, sober, elegant and especially performant. A pure and racy figure, simplified utilisation with a clip top cap and an assembly making it an essential reconstructable atomiser in this category. A success for lovers of vape axed towards flavours.

Association of the Bushido V3 RDA with the Rigel Mini

A pure and compact design

Design du Bushido V3 RDA

The Bushido V3 RDA is made for the rendering of flavours with a medium diameter of 22mm and a bell form for an unctuous vape. Without excessive frills, pure and brushed steel with a metallic ring, the Bushido V3 remains sober and exemplary finish.

A genius top cap

Top-cap du Bushido V3 RDA

A little confusing with the first use, the top cap of the Bushido V3 is a real innovation to effectuate the filling. Finished with top cap that need placing and which can fall, the new enhanced system is practical and comfortable with joints which procure excellent sealing.

A precise airflow

Airflow du Bushido V3 RDA

The flow rate is adjustable which procures excellent restitution of flavours as well as the important production of vapor whilst the airflow is fully open. The pull proposed by the Bushido is from DL to RDL with optimal rendering. Note: there is no whistling whether the pull is aired or tight.

A precise and well made assembly plate

Plateau du Bushido V3 RDA

The Bushido V3 RDA has a plate which can receive simple coils. It remains very simple to use with 2 large screws to lock the coil and 2 lateral side notches to guide your assembly. Intuitive and precise, the position of your coil is very rapid. The tank can accept the cotton and is quite deep for a good surface of vape but for those who wish to initiate squonk, BP Mods also has a BF pin so you have no problems with filling.

Features of the Bushido V3 RDA :

Diameter 22 mm Type of Plate Double posts / 2 entries
Material Stainless Steel Type of Assembly Mono coil

The Bushido V3 RDA is made in France by BP Mods.

The Bushido V3 Dripper is delivered with:

Contenu du Bushido V3 RDA

  • 1 Bushido V3 RDA
  • 1 BF Pin
  • 2 coils 0.35 ohm
  • 1 Changeable pieces kit
  • 1 Users guide

Discover the Packaging of the Bushido V3 RDA de BP Mods

Packaging du Bushido V3 RDA

4.9/5
Calculé à partir de 14 avis client(s)
Voir l'attestation de confiance

Avis soumis à un contrôle

0
0
0
2
12
1 2 3 4 5

Trier l'affichage des avis :

  • N. Frédéric
  • publié le 09/06/2021
  • 5/5
Tres bonne saveurs avec des coils en 2.5 max
  • G. Antony
  • publié le 14/05/2021
  • 5/5
Saveurs parfait , rapport qualité prix excellent.
  • F. Laurent
  • publié le 12/05/2021
  • 4/5
Super driper !
  • D. Savinien
  • publié le 06/05/2021
  • 5/5
Bon Dripper mono coil !
  • D. Thibaut
  • publié le 16/04/2021
  • 4/5
Fait pour ceux qui aiment le dl restrictif , ou mtl (en fermant les airflow ) . Pour ceux qui cherchent de l'aérien ,passez votre chemin , a utiliser en bottom feeder de préférence, bien qu'il y ait le couvercle pour juicer . Bonne restitution des saveurs mais je ne l'ai tester que sur un jus pour le moment
  • L. Cédric
  • publié le 13/04/2021
  • 5/5
Monté sur Pulse v2, un pur régal. Dripper bien conçu, top en bf. Saveurs précises aussi bien en gourmand qu'en fruité frais.
  • H. Florian
  • publié le 30/03/2021
  • 5/5
Belle découverte meilleur rda single pour moi, saveur vapeur au top, hésité pas foncez
  • B. Damien
  • publié le 14/03/2021
  • 5/5
Belle pièce.pour ma part je coil en fused Clapton Ni80 3mm de diamètre ça passe .tirage DL un peu serré.bonne saveur.vapeur correct.je recommandé.
  • C. Jean-Jacques
  • publié le 02/03/2021
  • 5/5
"Fin et joli. Remplissage original par charnière en haut. Chauffe un peu même à 20W (petit dripper)."
  • R. Stanislas
  • publié le 24/02/2021
  • 5/5
"Très bien"
More reviews...
Questions/Customer response on.

Do you wish to ask a question? One of our experts or customers will respond to you.

We have received your request and we thank you for it. You will receive an e mail confirming your question.