This website is ruled by the French legislation and age restriction on Ecig and nicotine. If your are not legally able to purchase ecig or nicotine products in the state or country where you live, please do not enter this site.
The Dripper Discovery Pack allows you to easily start with reconstructable materials. The pack proposes the famous dripper by Hellvape, the Dead Rabbit V3 RDA and all the necessary to make your proper coils.
The Dead Rabbit V3 RDA is a reconstructable axed towards vapor and flavours. You will find the famous design with rabbit engravings and its strong character. This new version is simple to use to discover the joys of RDA with an airflow ring which on one side has holes in a “honeycomb” format and on the other side with larger holes. The reservoir of the Dead Rabbit V3 is higher for a greater reserve of e liquid. The modifications are also present at the level of the assembly plate with large openings for the coils and rounded plots. To finish the Dead Rabbit V3 is included with an 810-drip tip, anti-bacterial, translucid of a beautiful effect.
To use the Dead Rabbit V3 RDA in an optimal manner Le Petit Vapoteur proposes the best tools in the pack. The DIY Mini Kit Vape District proposes a ceramic tweezer, angled pliers, pair of scissors and frame for the coils. The steel brush are also included so you can easily clean the coils.
The consumables are included with the Dripper Discovery Pack thanks to the Alien V2 coils Vape District by proposing a rendering of exceptional flavours with a large heating surface as well as the quality Cotton Vape District in a sachet of 10 pieces.
The Dripper Discovery Pack allows you to start reconstructables in complete calm with one of the best atomisers on the market, the Dead Rabbit V3 RDA and all the tools for easy assemblies. The Dead Rabbit V3 is your excellent companion and has rendering of optimal flavours. It is also included with a BF pin to use as the box and adapted mod.
The Dead Rabbit V3 RDA has several ameliorations always to optimise the flavours and rendering of the simple utilisation as possible. New plate which is even more practical, reviewed, and corrected airflow, raised tank… Only the design, still appealing which has been conserved.
The DIY Mini Vape District Kit will be a great help for you to create your assemblies that you would experiment with the Dead Rabbit RDA V3. A pair of scissors, ceramic tweezers, angled pliers, frame for the coils, cutting pliers, steel brush and the Vape District cotton made by Le Petit Vapoteur!
Hellvape have decided to conserve the famous design of the Dead Rabbit for the V3. Always with finesse in the details, with laser engravings and bevels top cap. A large choice of colours with a palette in black or blue by passing by gold with a magnificent 810 drip tip, therefore the colour varies depending on your choice. Quality finishes and exigence for this new Dead Rabbit, no fault!
Simple and functional plate
The famous plate in the rabbit ear format for easier assemblies. You will find 2 new rounded plots to ameliorate the flux of air and pour space to insert the new coil or coils depending on the desired assembly. The Dead Rabbit V3 conserves the inclined plots towards the center to reduce the risk of leaking.
More capacity
You will find a large tank 5 mm in height. This allows you to increase the capacity of e liquid whether it is the traditional utilisation or in BF thanks to the pin included with a redesigned arrival of e liquid.
Genius airflow
Each will find their favourite with the new airflow system by Dead Rabbit V3. In effect, you will have the choice between the honeycomb form composed of several holes for a restrictive pull or the three classic windows for an aired vape.
Features of the Dead Rabbit V3 Dripper:
Dimensions
37.35 x 24 mm
Type of Plate
Doubles posts / 4 entries
Material
Stainless Steel / Resin
Type of Assemblies
Mono / Dual Coils
The Dead Rabbit V3 is made by Hellvape.
The Dead Rabbit V3 RDA is included with :
1Dead Rabbit V3
1 810 Resin drip tip
1 BF Pin
1 Changeable pieces kit
DIY Mini Kit Vape District
With the DIY Mini Kit disposes of tools which are frequently used to confection coils for all atomisers. Ceramic tweezers, pair of scissors, cutting pliers, or builds for your coils, you will have all the necessary close to hand. The tools are re-grouped in a small case, ultra-resistant and in a compact format for less clutter. You can take the DIY Mini Kit with you everywhere !
Features of the DIY Mini Kit Vape District :
Length
147 mm
Width
100 mm
Thickness
35 mm
Material
Re-inforced tissue / Steel/ Ceramic
The DIY Mini Kit is made by Vape District.
The DIY Mini Kit is included with:
1 Box
1 Pair of ceramic tweezers
1 Angled pliers
1 cutting pliers
1 Pair of folding scissors in stainless steel
1 Coiling Kit Vape District with multiples builds
Discover the Packaging of the DIY Mini Kit Vape District
Alien V2 Vape District
The Alien V2 complex coils by Vape District are ready to use, for rapid and efficient assemblies for your Dead Rabbit V3 RDA in double coil. Made in Nichrome 80, the coils has an excellent reaction to heat without the parasitic taste.
With a diameter of 3 mm, the Alien V2 generously installs on the assembly plate.
Alien V2 Ni80 : 3x28 / 36, 2.5 mm, 0.3 Ω
The Alien V2 coils are made in Nichrome 80 are made by Vape District.
Cotton Vape District
The Cotton Vape District is the perfect ally for your Dead Rabbit V3 RDA. It has no parasitic taste and benefits with a special treatment without pesticides which guarantees the absence of impurities. It also offers good heat resistance and excellent durability. To finish it has exemplary capillaries which allows you to install all the atomisers including those including a large supply of e liquid.
STEEL BRUSH VAPE DISTRICT
The Vape Brush is an accessory which allows you to install DIY coils with a small metallic brush. The fibers are in 0.1 mm in diameter SS304.
- Pour plus d’informations sur les caractéristiques du contrôle des avis et la possibilité de contacter l’auteur de l’avis, merci de consulter nos CGU
- Aucune contrepartie n’a été fournie en échange des avis
- Les avis sont publiés et conservés pendant une durée de cinq ans
- Les avis ne sont pas modifiables : si un client souhaite modifier son avis, il doit contacter Avis Vérifiés afin de supprimer l’avis existant, et en publier un nouveau
- Les motifs de suppression des avis sont disponibles ici
2
3
7
28
117
12345
Trier l'affichage des avis :
B. Patrick
publié le 19/07/2022
suite à une commande du 08/07/2022
5/5
Beau produits RAS
L. Paul
publié le 08/07/2022
suite à une commande du 30/06/2022
1/5
nul!!
G. Léonardo
publié le 31/05/2022
suite à une commande du 21/05/2022
5/5
Kit complet parfait pour apprendre à faire ses résistance.
P. Jérémie
publié le 28/05/2022
suite à une commande du 19/05/2022
4/5
C'est ma première expérience avec le reconstructible. C'est asses compliqué, j'en suis a ma quatrième tentative et ça commence a ressembler a quelques choses mais je suis encore loin du rendu du zeus sub ohm. Le kit est de bonne qualité !
G. Ulrich
publié le 05/05/2022
suite à une commande du 27/04/2022
5/5
"Un kit complet pour un debut d’apprentissage"
B. Ethan
publié le 05/05/2022
suite à une commande du 26/04/2022
3/5
"Tout est bien dans le kit.. Mis à part le fait que je n'ai pas eu le tournevis dans la petite boîte, ce qui est pas mal embêtant quand on as payé pour :/"
Q. Alexis
publié le 09/04/2022
suite à une commande du 01/04/2022
5/5
"simple à utiliser"
D. Thomas
publié le 31/03/2022
suite à une commande du 22/03/2022
5/5
"Niquel! L'atomiseur est plus qu'efficace. Les outils parfait (mention spéciale aux coil master) Le fil est un peu fin mais facile à travailler et le coton fournis est super."
D. Thomas
publié le 29/03/2022
suite à une commande du 21/03/2022
5/5
"Très bien pour débuter et le coton est excellent"
H. Pierre
publié le 28/01/2022
suite à une commande du 20/01/2022
5/5
"Super pack pour débuter dans les reconstructibles."