Fatality M25 Atomiser - QP Design

Shop's favorite
0%
You found cheaper on another website ?
- +
62,42 €

The Canadians of QP Design invites you to a muscular vape with the splendid Fatality M25 Atomiser. This RTA of 25mm in diameter is made for imposing assemblies in single or double coils on an original and ventilation plate. The Fatality M25 is not only a beautiful atomiser, but it is also innovative by proposing 2 airflows which can be adjusted separately. A lateral aeration, aeration under the coils with 2 adjustable rings. With such equipment the Fatality M25 is plays on the flavours.

On the assembly side, the plate of the Fatality M25 has space for complex coils in duo. 4 connection plots, with screws on the side accepts coils with all types of resistive wires. In the middle of the plate, there is an aeration type “Beehive” in alveoli and ventilates the assembly from the center.

On the capacity side, there are 2 reservoirs, depending on your preference. With a bubble tank with a capacity of 5.5ml and a straight tank with a capacity of 4ml. The filling is effectuated from the top of the atomiser. A superb 810 transparent drip tip is at the top of the atomiser.

The Fatality M25 Atomiser is made by QP Design.

Features
Height 52 mm
Diameter 25 mm
Capacity 5,5 ml
Type of Vape Direct Inhaling
Worktop/Plate 4 Plots
Assembly Mono / Dual coils

FATALITY M25 QP DESIGN ATOMISER

Présentation de l'Atomiseur Fatality M25 QP Design

 

With a cared for design, the Fatality M25 is equipped for the rendering of powerful flavours, with an aeration which is entirely adjustable. The Fatality M25 has the originality to offer 2 rings for the aeration of the coils. The plate is relatively large (diameter of the atomiser is 25mm) it allows the assembly of complex coils in simple and double coils.

This plate is quite particular as it disposes of 4 plots (with screws). In the center of the plate. A real aeration grill assuring ventilation to the heart of the atomiser! All a programme in mono or double coils.

 Association of the Fatality M25 QP Design with the Surric XT Cuba Skull

QP Design !

Finitions de l'Atomiseur Fatality M25 QP Design

Double coils, quad airflows ! QP design does not do thing by half and proposes the Fatality M25 atomiser of a good size. M25 for 25mm in diameter of course, the Fatality is imposing. A beautiful transparent 810 drip tip softens the spartan line of the Fatality M25.

Drip-tip de l'Atomiseur Fatality M25 QP Design

Quad airflow

Airflow quad de l'Atomiseur Fatality M25 QP Design

This is a first, the Fatality M25 has 2 adjustable rings for the aeration of the plate. The ring which regulates the 2 airflows on the top occupies the aeration on the side of the coils. The ring at the base of the 2 openings occupies the aeration in the center of the plate and under the assemblies. The objective is to refine the pull and ameliorate the rendering of flavours. The vapor is not left to the side gracious to the good size of coils assembled.

 Airflow plateau de l'Atomiseur Fatality M25 QP Design

Four Assembly Plots

Plateau de l'Atomiseur Fatality M25 QP Design

With the Fatality M25, you can install 2 beautiful complex coils in simple and double coils, gracious to the 4 screw plots on the assembly plate. In the center you will find an aeration grill which ventilates and avoids the droplet of e liquids at the bottom of the atomiser.

Easy Filling

Remplissage de l'Atomiseur Fatality M25 QP Design

The assembly plate is also hermetic so you can check the assembly without having to empty the reservoir. The capacity of the Fatality M25 varies depending on the coil used : 4ml or 5.5ml. The filling is effectuated after unscrewing the top cap, via two large openings adapted to all drippers.

Features of the Fatality M25 Atomiser:

Height Capacity 4 ml/5,5 ml
Diameter 25 mm Type of Plate 4 plots (screw)
Drip-Tip 810 Types of Assemblies Mono/Dual coils

The Fatality M25 Atomiser is made by QP Design.

The Fatality M25 Atomiser is delivered with:

Contenu de l'Atomiseur Fatality M25 QP Design

  • 1 Fatality M25
  • 1 4 ml Reservoir
  • 1 810 Drip-Tip
  • 1 Detached Pieces Kit
  • 1 Authentication Card

Discover the Packaging of the Fatality M25

 Packaging de l'Atomiseur Fatality M25 QP Design

Product Reviews
  • Number of Reviews : 54
  • Average Grade : 4.9 /5
  • P. Charly
  •  the 18/07/2019
  • 5/5
Bien
  • D. Matthieu
  •  the 17/07/2019
  • 5/5
Très bon produits
  • F. Julien
  •  the 12/07/2019
  • 5/5
tres bon
  • L. Mickael
  •  the 07/07/2019
  • 5/5
Très bon ato
  • C. Stephane
  •  the 04/07/2019
  • 5/5
Saveurs, vapeur tout est vraiment parfait.
  • C. Stephane
  •  the 29/06/2019
  • 5/5
Une tuerie, ce gros bébé. Saveurs topissimes et facile à vivre.
  • F. Xavier
  •  the 28/06/2019
  • 5/5
5/5 le top ! ;) single ou double coils ;) finition superbe metal de super qualiter ;) il faut juste aimer les gros tirages. ;) meme si on peu regler en mtl ^^ .
  • B. Allan
  •  the 23/06/2019
  • 5/5
Very good build quality and excellent flavour delivery - recommended!
  • B. Allan
  •  the 23/06/2019
  • 5/5
Took a couple of builds to get the wicking right, but when you do the Fatality M25 delivers superb flavour. Well worth consideration!
  • D. Philippe
  •  the 21/06/2019
  • 5/5
Monstre de valeur et de saveur j’en reviens toujours pas A prendre les yeux fermés
More reviews...