Wasp Nano RTA Atomiser - Oumier

You found cheaper on another website ?
- +
17,90 €
13,90 €

With the Wasp Nano RTA, Ouimer has shown its new passion for a reconstructable atomiser of a small size and in mono coil for full flavours. The Wasp Nano RTA atomiser has a diameter of 23mm it is in effect compact and it has all you need to rhyme flavour and vapor.

The Wasp Nano RTA has a beautiful assembly plate for “single coil”. Easy to use, it has 2 aerations which hits the coil on each side. The double airflow works with a drip tip which has a wide output to create good vapor at suction.  

In effect, the Wasp Nano RTA, the drip tip is associated with the top-cap which has a transparent finish and polymer PCTG colour. The filling is effectuated by unscrewing the drip top to obtain a capacity of 2ml. The aeration, itself is entirely adjustable by the base of the Wasp Nano RTA atomiser.

The Wasp Nano RTA Atomiser is made by Oumier. 

Height 35 mm
Diameter 23 mm
Capacity 2 ml
Material Acier / Pyrex / PCTG
Worktop/Plate Double posts
Assembly Mono-coil



35mm in height for a diameter of 23mm, do not trust its modest size, the Wasp Nano RTA is sized for vapor. The drip-top which is ultra large and its double airflow produces a beautiful velouté of vapor. But, at Ouimer you will not forget the flavours, but a small plate has been intended for ultra-simple mono coils and a beautiful atomisation chamber for a rendering even more round.

The Wasp Nano RTA is a bottom coil atomiser, designed for assemblies in mono with beautiful coils with beautiful complex wires (Alien, Fused etc...). The Wasp Nano RTA has a capacity of 2ml in e liquid and the reservoir is filled from the top by unscrewing the drip top.

Association of the Wasp Nano RTA Oumier with the Famas 100W Alphafox


The Wasp Nano RTA is therefore a small reconstructable atomiser made in Steel, Pyrex Glass and PCTG. The PCTG is resistive polymer which has the particularity to be transparent. Ouimer uses this for the drip top which gives the Wasp Nano RTA its particular figure.

At the heart of the Wasp Nano RTA you can observe the atomisation chamber which is particularly curved and ample to concentrate on the vapor.

Performant Plate

Loyal to mono-coil, the Wasp Nano RTA is a real "bottom-coil" atomiser, with the assembly plate at the base of the tank, but also leaves a generous place for the cotton fiber. The Mesh of the cotton dives towards the base of the atomiser so it always remains soaked with e liquid.

The plate is simple itself: 2 poles, 2 screws. It can be used by a novice in reconstructable material.

Double Airflow

You can observe on the assembly plate, the air which passes through two connection plots which hits the coil on the sides. Even lower, at the base of the Wasp Nano RTA is an atomiser which is globally aired but you can tweak the rendering of flavours

Easy Filling 

The Wasp Nano RTA has a capacity of 2ml in e liquid which is effectuated from the top of the tank and a reservoir in Pyrex. Turn the drip-top to 90° in a anti-clockwise position, slide in the tip of the e liquid bottle into the large opening and fill. Simple and efficient

Features of the Wasp Nano RTA :

Height 35 mm Capacity 2 ml
Diameter 23 mm Type of Plate Double Posts
Material Steel/Pyrex/PCTG Type of Assembly Mono-Coil 
Drip-Tip Owner Filling From the Top

The Wasp Nano RTA Atomiser is made by Oumier. 

The Wasp Nano RTA Atomiser is delivered with:

  • 1 Wasp Nano RTA
  • 1 Coil
  • 1 Cotton Pad
  • 1 Detached Pieces Kit
  • 1 Replacement Pyrex Tank
  • 1 Utilisation Guide

Discover the Packaging of the Wasp Nano RTA


Product Reviews
  • Number of Reviews : 56
  • Average Grade : 4.4 /5
  • D. Laurentiu
  •  the 22/07/2019
  • 5/5
A bargain!
  • P. Basile
  •  the 20/07/2019
  • 5/5
Dans la continuité de la série wasp. Rien à redire que ce soit les saveurs, le look ou encore la facilité de montage
  • K. Eric
  •  the 19/07/2019
  • 5/5
Un excellent petit RTA, facile d'utilisation et éfficace.
  • V. Chantal
  •  the 07/07/2019
  • 5/5
Très bien.
  • V. Bariz
  •  the 24/06/2019
  • 4/5
Super... Franchement je ne m’attendais Pas à aussi bien! Bon rendu des saveurs, pas évident à cotonner mais quand on a la technique ça va tout seul... prix juste ridicule comparé à la qualité... magnifique en gold sur ma dotbox 75w black complètement flush car 23mm... je vais sûrement en reprendre dans d’autres Coloris
  • L. Jean Luc
  •  the 18/06/2019
  • 5/5
Excellent produit
  • M. Roman
  •  the 17/06/2019
  • 5/5
  • L. Ludovic
  •  the 12/06/2019
  • 5/5
Au top pour commencer. Simple, pas cher, et pas de fuites même pour un premier montage .
  • T. Jf
  •  the 11/06/2019
  • 5/5
  • H. Cedric
  •  the 05/06/2019
  • 5/5
Super pour les aromes
More reviews...