Serpent Elevate RTA Atomiser - Wotofo

Sale
0%
You found cheaper on another website ?
- +
21,90 €

The Serpent Elevate RTA is back from the famous Serpent Range by Wotofo. A reconstructable atomiser 24mm in diameter, intended for mono coils with postless assembly plate. Delivered with its own tools for an easy cut, the assemblies on the Serpent Elevate is child's play. 

The Serpent Elevate has a particular design, with original snake skin type engravings. The capacity of the Serpent Elevate depends on the tank you use, straight or bubble, with a respective capacity of 3.5ml and 4.5ml.

The aeration of the Serpent Elevate is at the top of the tank to avoid any leaking of e liquids. It travels down towards the coil to hit the coil in the 3 places. The air, vapor and the flavours increase (Elevate) then follows to the 810-drip tip. The Serpent Elevate is a good mixture of flavoured vape and a vape full of vapor.

The Serpent Elevate RTA is made by Wotofo.

Features
Height 43 mm
Diameter 24 mm
Capacity 3,5ml/4,5ml
Type of Vape Direct Inhaling
Worktop/Plate Postless
Assembly Mono-Coil

 SERPENT ELEVATE RTA ATOMISER - WOTOFO

When the principal atomiser by Wotofo has a new skin, the Serpent Elevate appears. The Serpent Elevate is an RTA, 24mm in diameter with a double airflow at the top of the tank to avoid any leaking of liquids. The assembly plate is particularly postless. Intended for single coils, it has 4 entries to place the coil no matter the form.

The Serpent Elevate is also delivered with the “Coil Trimming Tool”, a small tool which allows you to cut the feet of the coil, allowing you to always have a good size. 

With the snake skin design, the Serpent Elevate is also delivered with numerous drip tips, in magnificent acrylic with different colours. 2 tanks are supplied, of choice, one straight tank with a capacity of 3.5ml and a bubble tank with a capacity of 4.5ml.

Association of the Serpent Elevate with the Lustro 200W Asmodus

Snake Design

Snake Skin Engravings on the Serpent Elevate Airflow

To link it with its name, Wotofo have engraved the snake skin pattern on the top-cap of the Serpent Elevate. It is not only for the design this finish allows you have a good hold in the hand to regulate the aeration. On the Serpent Elevate, the airflow is placed on the top cap! The atomisation chamber also benefits with the snake skin design.

Engravings on the Atomisation Chamber of the Serpent Elevate

Top Airflow

Airflow of the Serpent Elevate

The aeration has been studied on the Serpent Elevate Atomiser. 2 openings are at the top of the atomiser to avoid any leaking of e liquids. The air travels through the atomiser towards the center of the plate, to 3 places: to the 2 sides and under the coil. The aeration has 3 levels to maximise the rendering of flavours. The pull is regulated by the top cap depending on your preference.

Postless & Mono-Coil

Plate of the Serpent Elevate

The assembly plate of the Serpent Elevate is made for assemblies in simple coil. The postless type (no assembly plots), it has 4 entries for the feet of the coil, which is rather new for “Single Coils”. The disposition of the plate allows you to effectuate intuitive assemblies. No matter the direction taken by the feet of the coils, they will always find their place on the plate.

The Serpent Elevate has a few bonuses such as the “Trimming Tool” which allows you to always have the feet of the coils at a good length. The cotton also finds a large place on the plate.  It is slightly elevated, the fiber sits at the base of the tank which allows the cotton to be soaked permanently and avoids any dry-hits.

Trimming Coil Tool of the Serpent Elevate

Capacity & Filling

Filling of the Serpent Elevate

The Serpent Elevate must be filled from the top of the tank by unscrewing the top cap. Th capacity varies depending on the tank you opt for. A straight tank which has a capacity of 3.5ml or bubble tank of 4.5ml.

Features of the Serpent Elevate:

Height

43 mm with DT

Capacity

3,5ml/4,5ml

Diameter

24 mm

Type of Plate

Postless with 4 entries

Drip-tip

810

Type of Assembly

Mono-coil

The Serpent Elevate RTA is made by Wotofo.

The Serpent Elevate RTA is delivered with:

Contents of the Serpent Elevate

  • 1 Serpent Elevate
  • 1 Trimming Tool Coil
  • 1 Supplementary Drip Tip
  • 1 510 Adapter
  • 1 Tank
  • 1 Users Guide
  • 1 Framed Staple Clapton Coil Ni80 of 0.33ohm (to be used from 40W to 55W)
  • 1 Agleted Cotton Strip
  • 1 Detached Pieces Kit

Discover the Packaging of the Serpent Elevate RTA Wotofo

Packaging of the Serpent Elevate

Product Reviews
  • Number of Reviews : 252
  • Average Grade : 4.6 /5
  • M. Martine
  •  the 23/07/2019
  • 5/5
C'est un bon ato pour ceux qui aiment le reconstructible il est très facile à utiliser on a aucune fuite 2 contenances différentes j'adore je ne la lâche plus
  • L. Romuald
  •  the 23/07/2019
  • 4/5
léger pour les saveurs
  • V. Brice
  •  the 19/07/2019
  • 5/5
Très bon Atomiseur, saveurs au rendez-vous, vape excellente pour un mono coil.
  • P. Alexandre
  •  the 19/07/2019
  • 4/5
Montage du coil pas simplicime, place limitée. Sinon bon ato.
  • M. Frédéric
  •  the 18/07/2019
  • 5/5
Tres bien
  • V. Andre
  •  the 18/07/2019
  • 5/5
Parfait
  • R. Nicolas
  •  the 17/07/2019
  • 5/5
Un ato simple à monter qui marche assez fort et qui ne fuit jamais.
  • L. Philippe
  •  the 17/07/2019
  • 4/5
Serpent elevate presque aussi bien que mes deux petits Gear et mieux que mon Intake niveau saveurs, le tout essayé avec la même résistance, la même puissance ,le même liquide et bien sûr le même bonhomme.
  • G. Laurent
  •  the 17/07/2019
  • 5/5
Boite très compléte et super ato mais qui consomme pas mal
  • D. Julien
  •  the 17/07/2019
  • 5/5
Meilleur rapport qualité / prix ! Facile à monter, facile à nettoyer, zero fuites, bonnes saveur. Seul bémol, gourmand en liquide.
More reviews...