DotRDTA Dotmod

High End
0%
You found cheaper on another website ?
- +
49,90 €

Dotmod have created their first RDTA called DotRDTA. The DotRDTA  Atomiser is designed to offer flavours of a dripper with a reservoir which has a capacity of 2ml. For larger autonomy of an e liquid, the DotRDTA 24 is delivered with a BF Pin which allows you to use it in Bottom-Feeder. The plate, identical to the DotRDA 24 is for double coils and leaves alot of possibilities for assemblies. With the design level, the DotRDTA Atomiser stands out the massive us in Ultem, whether it is for the top cap or the reservoir. 

The DotRDTA is made by Dotmod.

Features
Height 40 mm
Diameter 24 mm
Capacity 2 ml
Material Steel/Ultem
Type of Vape Direct Inhaling
Compatibilité BF
Worktop/Plate Central Post
Assembly Dual coils

 DOTRDTA 24 ATOMISER - DOTMOD

Presentation Photo of the DotRDTA

The DotRDTA is a reconstructable atomiser with 24mm in diameter designed to offer the best rendering of flavours. The DotRDTA keeps the same principal of assemblies with the DotRDA 24 with its central screws and clamp on spring system. Made in Ultem and Gold Plated Steel, the atomiser has a 2ml reservoir and disposes of a BF Pin for optimized autonomy in e liquid. 

Association of the DotRDTA with the Dottsquonk BF Dotmod

Steel and Ultem

Finishes of the DotRDTA

The DotRDTA Atomiser is a mix of Gold-Plated Steel and Ultem. The top-cap and the reservoir are effectively made in modern material which is particularly resistive to heat without being deformed. The Ultem equally allows the DotRDTA to be light in weight. The Dotmod Logo is present on the bell of the Atomiser, but also on the 810 drip tips in (Delrin or in Ultem) which are supplied.  

Dotmod Stamp of the DotRDTA

Revolutionary Plate (bis)

Plate of the DotRDTA

The DotRDTA conserves the construction plate of the DotRDA 24. A very simple plate to use which fixes the resistive with the help of only one and unique spring clamp. One volumes screw allows you to adjust the tightening for a simple and rapid placing of your 2 coils. The 2ml tank is of its own, obstructed with an Ultem Plate, disposing of 4 notches to slide the extremities of your Cotton Bands. The DotRDTA 24 offers flavours of a dripper and autonomy in E liquid of an Atomiser. 

Notches for the Cotton of the DotRDTA 

 BF and Simple Charging 

Filling of the DotRDTA via Screw

The filling of the DotRDTA Atomiser can be done in 2 ways. The first consists of sliding the dripper of your bottle into the bell which is presented on the central screw. You can equally, if you have at your disposition a BF Mod, replacing the 510 Pin with the Bottom Feeder Pin which is supplied. All you need is the "squonker" to fill the tank of the DotRDTA 24!

BF Pin filling the DotRDTA 

DotKey and DotCoils

Accessories of the DotRDTA 

In addition of the BF Pin, the DotRDTA Atomiser is supplied with 2 Dot coils, allowing you to create your first assemblies. A Dotkey will help you to manipulate the central screw with elegance. 

Features of the DotRDTA Dotmod :

Height 40 mm Diameter 24 mm
Material Gold Plated Steel/Ultem/Delrin Type of Plate 1 Central Post
Drip-tip 810 Dotmod Type of Construction Double Coils

The DotRDTA Atomiser is made by Dotmod.

The DotRDTA 24 is delivered with:

Contents of the DotRDTA 

  • 1 DotRDTA 24
  • 1 Dotkey
  • 1 Supplementary drip-tip 810 in Ultem
  • 2 Fused Clapton Dot Coils 
  • 1 Pin BF
  • 1 Allen Key
  • 1 Detached Pieces Kit
Product Reviews
  • Number of Reviews : 87
  • Average Grade : 4.6 /5
  • D. Vincent
  •  the 17/07/2019
  • 5/5
Bonne saveur simple à monter
  • D. Dominique
  •  the 09/07/2019
  • 5/5
bonne qualite
  • D. Julien
  •  the 12/06/2019
  • 4/5
Très bon, mais le squonk demande un peu de méthode.
  • H. Aurelien
  •  the 04/06/2019
  • 5/5
Pour ma dotmod BF 100w, c'est parfait.
  • H. Antoine
  •  the 22/05/2019
  • 4/5
Conforme au descriptif, bon rendu saveur/vapeur et simple d'utilisation
  • R. Pierre
  •  the 19/05/2019
  • 5/5
Au top
  • G. Emilie
  •  the 13/05/2019
  • 2/5
Trop cher pour ce que c est, et c est pas ma vape du tout le double coil, j' aurais essayé, et puis impossible de régler l air flow il est inexistant dans le sens que sinon on tombe sur le coton et perte de saveur. Je l ai échangé avec un RDA Alcatraz sur un site de troc.
  • R. Steven
  •  the 30/04/2019
  • 4/5
Attention à ne pas pulser trop fort quand vous faite vos coil sans le Cotton risque de le faire fondre, top cap s’enleve Rapidement voir trop..
  • M. Jose
  •  the 25/04/2019
  • 5/5
Rien à signaler
  • M. Tiphaine
  •  the 23/04/2019
  • 4/5
Dommage bas d'autres choix de couleur mais il est quand-même génial
More reviews...