Fury RTA Rage Mods

79,90 €
High End
Add to
my list
A question about
this product ?
this product
Je partage ce produit

Vous pouvez maintenant coller l'url de la page

-18 If you do not smoke, do not vape
- +
79,90 €
Your advantages
If you buythis product
1€ offered for every 10 € of purchase
7€ offered with your next purchase
Loyalty points for this product : 7
Loyalty points already in your cart : 0
Loyalty voucher amount* : 7,00 €
(*) Available on your next order
Free 24h delivery without signature
Your order at home Thursday !
3x Plus que 0.10€ pour régler en 3X sans frais !

The Fury RTA is a quality reconstructable atomiser made by the Canadians Rage Mods It can be adapted to large boxes or mods with a diameter of 28 mm. Made for an aired vape and high power, it accepts double coils with a postless plate equipped with 4 inclined fixation posts with 2 large tanks on each side to place the cotton. The particularity of the Fury RTA atomiser proposes a large choice of airflow pins to adapt your precise pull.

The Fury RTA atomiser is precise, it offers the choice between 6 airflow pins which you will find on the assembly plate so you will be able to find your preferred pull. You will also have the possibility to pass from very aired DL to tight in RDL depending on your type of e liquid and taste.

The Fury RTA gives you two possibilities at the level of capacity with e liquid: 4 or 5.5 ml with the bulb tank for long moments of vape with flavours and vapor. It remains easy to use with a top cap which can be unscrewed for rapid and secured filling.

The Fury RTA atomiser can be linked to large boxes with precise flavours and well-presented thanks to the large cotton mesh which remains soaked with e liquid. No compromise between flavour and vapor with the Fury RTA.

The Fury RTA is made by Rage Mods.

Height 48.5 mm
Diameter 28 mm
Capacity 5.5 ml
Type of Vape DL
Plate Postless
Assembly Double coil
Associated products
  • Essential
  • Mod
  • Drip Tip
  • Accessories
    • Mod

    Here you will find Mod adapted to your

    Here you will find Drip Tip adapted to your

    Fury RTA Rage Mods

    Présentation du Fury RTA Rage Mods

    Find a quality and strong vape with the Fury RTA by Rage Mods. A reconstructable atomiser made for sub ohm, with a diameter of 28 mm and has a capacity of 5.5ml. With a generous assembly plate allows you to install 2 beautiful coils and and control the pull with the grills included. The Fury RTA is very simple to use with a filling from the top and airflow ring under the top cap. Rage Mods is a complete atomiser, of high quality with several options for demanding vapers who do not wish to compromise between flavours and vapor.

    Association of the Fury RTA Rage Mods with the Hadron Steam Crave

    XXL size

    Design du Fury RTA Rage Mods

    The Fury RTA reconstructable atomiser by the Canadians Rage Mods is adapted to boxes and mods with a large 28 mm in diameter. However it remains very compact with a straight tank of 4ml and a generous bulb reservoir in 5.5ml for an aired vape with strong powers and a high rate of VG. Elegant and robust with irreproachable quality fabrication, the Fury RTA is convenient for demanding vapers.

    Filling from the top

    Remplissage du Fury RTA Rage Mods

    The Fury RTA can be easily filled by placing it above the tank. You need to turn it quarter turn to access the large openings so you can insert the tip of e liquid bottles. Everything slides perfectly, the quality is at the top and you only needs a few seconds to make the most of your Fury RTA.

    Large assembly plate

    Plateau du Fury RTA Rage Mods

    Rage Mods does not do things by halves with the Fury RTA. You will find an imposing postless plate equipped with 4 inclined fixation posts. You can easily place 2 large coils, simple or complex for a generous and flavoured vape. Thanks to the two large tanks on each side so the coil is always soaked correctly, and you can enjoy your preferred e liquids.

    Optimised airflow

    Airflow du Fury RTA Rage Mods

    The Fury RTA atomiser has a airflow ring at the base of the tank, very well thought of. Composed of three holes it allows you to finely adjust your pull, depending on the power used and type of e liquid.

    More, the Rage mods proposes 6 airflow pins to place under the coil to precisely adapt the flux of air. Extreme personalisation which is at the height of an exceptional atomiser. You can pass from a very aired pull to very restrictive for a vape depending on your preference.

    Features of the Fury RTA by Rage Mods :

    Height 48,5 mm Capacity 4 / 5.5 ml
    Diameter 28 mm Type of Plate Postless
    Drip-tip 810 Coils  Double coil

    The Fury RTA atomiser is made by Rage Mods.

    The Fury RTA atomiser is included with:

    Contenu du Fury RTA Rage Mods

    • 1 Fury RTA
    • 1 4 ml reservoir (pre-installed)
    • 1 5.5 ml bulb reservoir
    • 6 Airflow pins
    • 1 510 drip tip
    • 1 510 adapter
    • 1 Silicone reducer (2ml)
    • 1 Detached pieces kit

    Discover the Packaging of the Fury RTA

    Packaging du Fury RTA Rage Mods

    Calculé à partir de 1 avis client(s)
    Voir l'attestation de confiance

    Avis soumis à un contrôle


    - Pour plus d’informations sur les caractéristiques du contrôle des avis et la possibilité de contacter l’auteur de l’avis, merci de consulter nos CGU

    - Aucune contrepartie n’a été fournie en échange des avis

    - Les avis sont publiés et conservés pendant une durée de cinq ans

    - Les avis ne sont pas modifiables : si un client souhaite modifier son avis, il doit contacter Avis Vérifiés afin de supprimer l’avis existant, et en publier un nouveau

    - Les motifs de suppression des avis sont disponibles ici

    1 2 3 4 5

    Trier l'affichage des avis :

    • C. Cyril
    • publié le 07/12/2022
    • suite à une commande du 22/11/2022
    • 4/5
    Bon ato mais déçu des grilles d'airflow 2foi 2 grille identique et 2 seules, bizarre comme quantité
    Questions/Customer response on.

    Do you wish to ask a question? One of our experts or customers will respond to you.

    We have received your request and we thank you for it. You will receive an e mail confirming your question.