IPV Aspect Pod Kit

You found cheaper on another website ?
- +
32,90 €
15,90 €

The IPV Aspect Pod by Pioneer4you is a compact and nomad electronic cigarette made for a number of e liquids, in particular e liquids with nicotine salts. The IPV Kit Aspect Pod is equipped with an adjustable aeration system which allows you to choose the type of pull, aired or tight. It is equally possible to choose the power gracious to the Yihi SXK1 chipset.

With an original design, the IPV Aspect Pod Kit allows different settings which brings a comfortable vape. The battery of 750 mAh brings good autonomy for a coil of 1.0 ohm in SS316L, a little bit gourmet in energy.

The IPV Aspect Pod functions with an activation switch which allows you to change the power (standard or increased). The button also serves as an interrupter of the Pod and has 4 LED’s which indicate the charging level of the battery. The battery can be recharged by the micro USB cable which is supplied. The cartridges are interchangeable and can hold up to 2ml in e liquid.

The IPV Aspect Pod is made by IPV-Pioneer4you.

Height 90 mm
Longueur 40 mm
Width 10 mm
Capacity 2 ml
Autonomy 750 mAh
Type of Vape Indirect Inhaling
Power 2.8V - 4.2V
Coil 1.0 ohm


Photo de présentation du Kit IPV Aspect Pod

The IPV Aspect is a perfectioned pod which is simple to use in Indirect Inhaling (MTL). Equipped with the Yihi SXK1 chipset, it allows you to have 2 power options which are easily accessible. No complexity with the IPV Aspect, the all in one cartridge is integrated with a 2ml reservoir and a coil in SS316 of 1.0 ohm adapted to a number of e liquids and particularly nicotine salts.

The cartridge offers the possibility to regulate the aeration for the choice of pull. This is a new for a pod. The battery offers excellent autonomy with a capacity of 750 mAh, a rapid recharge with the USB. The design has been particularly studied with the IPV Aspect with an original figure and a finish of great quality.

To whom addresses the IPV Aspect Pod Kit?

Kit IPV Aspect Pod

To begin or have an electronic cigarette which is discreet, light but elegant, the IPV Aspect is adapted to vapers of all levels. Adapted to e liquids which have a high rate of nicotine, especially with nicotine salts, the IPV Aspect is also simple to use with a practical filling system. The implementation is rapid and has intuitive utilisation with a start button which equally regulates the power of the pod. Modern and simple to resume, for a vape in Indirect Inhaling.

Aired Design 

Design du Kit IPV Aspect Pod

The IPV Aspect Kit has been specially designed in California so it has an original line. Armor in Stainless Steel with beautiful finishes, the IPV Aspect has an agreeable and aired design. Its compact size allows you to have a frequent and discreet utilisation with less clutter.

Prise en main du Kit IPV Aspect Pod

Yihi Chipset

Chipset du Kit IPV Aspect Pod

The IPV Aspect chipset is equipped with a Yihi SXK1 chipset which offers all the elementary protections of the pod (low voltage, overheating, short circuits etc.) It equally allows you vary the power which is original for a pod. There is also a medium power of 7.8 to 11.5 Watts. It has a maximum output power of 7.8 to 13.7 Watts.

The 4 LED’s of the pod indicate the power being used: LED’s 1 and 4 are in maximum power mode, and LED’s 2 and 3 are in medium power mode. The changes of the power mode are effectuated with 5 successive clicks of the start switch.

The 4 LED’s are also indicators for the charging level if the battery:

  • 1 LED = Autonomy of 25%
  • 2 LED’s = Autonomy of 25% to 50% 
  • 3 LED’s = Autonomy of 50% to 75%
  • 4 LED’s = Autonomy of 75% to 100%

IPV Aspect Cartridge 

Cartouche du Kit IPV Aspect Pod

This is an “all-in-one” cartridge which is proposes with the IPV Aspect Kit. It is integrated with a 2ml reservoir and has a coil of 1.0 ohm composed of SS316 and organic cotton. The filling is effectuated under the cartridge with the help of a silicone cap

Filling of the IPV Aspect Cartridge:

Remplissage du Kit IPV Aspect Pod

  • Remove the cartridge towards the bottom
  • Return the cartridge towards the bottom
  • Retract the silicone cap
  • Fill the reservoir with 2 ml in e liquid
  • Close the cap
  • Insert the Cartridge in the IPV Aspect
  • Wait a few minutes so the coil is completely soaked with e liquid before first utilisation


Choice of Pull

airflow du Kit IPV Aspect Pod

The cartridge of the IPV Aspect Kit has the particularity to module the aeration. On the cartridge side you will find in effect a silicone stud which can increases or decreases the entry of air to obtain a tight or aired pull.

Features of the IPV Aspect Pod Kit:

Dimensions du Kit IPV Aspect Pod

Dimensions 90 x 10 x 40 mm Autonomy 750 mAh
Material Stainless Steel Capacity 2 ml
Power 2,8V-4,2V Coils 1.0 ohm

The IPV Aspect Pod Kit is made by IPV-Pioneer4you.

The IPV Aspect Pod Kit is delivered with:

contenu du Kit IPV Aspect Pod

  • 1 IPV Aspect
  • 1 1.0 ohm Cartridge 
  • 1 Micro USB Cable
  • 1 Utilisation Notice

Discover the Package of the IPV Aspect Pod 

Packaging du Kit IPV Aspect Pod

Product Reviews
  • Number of Reviews : 5
  • Average Grade : 3.2 /5
  • N. Jean Louis
  •  the 10/04/2019
  • 5/5
Encombrement minimum, jolie design et très efficace
  • S. Guillaume-Antoine
  •  the 09/04/2019
  • 1/5
1 étoile juste pour le design du produit et sa puissance. La cartouche n'est tout simplement pas pratique pour le remplissage voire impossible, (le liquide fuit) ce qui rend l'objet pratiquement inutilisable. Sachant que j'ai acheté plusieurs cartouches. Achat à éviter.
  • D. Franck
  •  the 16/03/2019
  • 4/5
Pas mal
  • F. Axel
  •  the 13/03/2019
  • 2/5
Esthétiques sympa. Mais pour la vap gouts de brulé sur 2 pod sur 4. Pourtant bien amorcé.
  • D. Franck
  •  the 09/03/2019
  • 4/5
Sur le principe sais pas mal pour vaper avec possibilité de choisir entre 2 puissances de vap le seul truc qui peut être légèrement penible sais le rechargement du pod en liquide ,Sa a tendance a ressortir du trou de remplissage au moment de recharger surtout avec des liquides en 50/50 .Du coup j’u Des bouteilles avec aiguille intégrer se qui facilite le remplissage