Juxta V2 Titane Pro-MS Mod


360,00 €
High End
0%
Add to
my list
A question about this product ?
Share
this product
Je partage ce produit

Vous pouvez maintenant coller l'url de la page

-18 If you do not smoke, do not vape
360,00 €
next available
Notify me when available
Your advantages
If you buythis product
1€ offered for every 10 € of purchase
36€ offered with your next purchase
Loyalty points for this product : 36
Loyalty points already in your cart : 0
Loyalty voucher amount* : 36,00 €
(*) Available on your next order
The express delivery is free !
Your order at home Tuesday !
3x You can pay 3x free of charge

The Juxta V2 Titane Pro-MS is a double barrel battery mod for a vape with the 2 x 18650 batteries. The Juxta V2 is made in Titan grade 2. A light and resistive titan, extremely solid and has an oxide protection. The deck, connection and activation button are made in brass. The Juxta V2 Titane Pro-MS is 100% meca and the 2 x 18650 batteries are to be installed in series and can offer up to 8.4 volts.

The Juxta V2 Titane Pro-MS has a 510 connection for atomisers of 24mm in diameter. On the side, the engraved switch is magnetic and lockable. In effect it is equipped with 2  neodymium magnets, which provides a pleasant stroke and secures the mod with a quarter turn.

The Juxta V2 Titane Pro-MS mod is also available in a version to be used with the 18350 batteries.

The Juxta V2 Titane Pro-MS Mod is made in France by Wheels & Time.

Batteries Not Included.

Features
Height 96 mm
Width 49 mm
Diameter 24 mm
Weight 287 g
Material Titan / Brass
Battery 2 x 18650
Material reserved for informed public A Mechanical Mod destined for experts with excellent knowledge in Ohm law It is strongly advised to use this type of product with:

Des résistances ayant une valeur supérieure à 0,20 ohm

Des accus de qualité et en parfait état de fonctionnement

 JUXTA V2 TITANE PRO-MS MOD

The Juxta V2 Titane Pro-MS is a meca mod of great quality made with the greatest care and light materials: titan grade 2 and in brass to make the mod last a long time and against wear and tear. The Juxta V2 Titan Pro-MS has 2 barrels so it can be vaped with 2 x 18650 batteries (not included), to be installed in series and can reach up to 8.4 volts, full charge.

The Juxta V2 Titane Pro-MS also has a magnetic switch which is magnetic and lockable but also has a 510 connection which can be adjusted for a comfortable vape and in security with atomisers which have a diameter of 24mm maximum. The repulsion magnetic switch is equipped with 2 neodymium magnets which offers an agreeable stroke.

Juxta V2

The Juxta V2 has an original design and benefits with perfect machinery. The Juxta V2 has 2 titan tubes, light, resistive and extremely solid. It also protected with an oxide coating. It is also made in brass for the turntable part, connection, and switch. This is engraved with the Wheels & Time logo.

Double battery

With two tubes, the Juxta V2 mod allows you to vape with excellent autonomy. You can benefit with the 2 x 18650 batteries (non-included) which can be installed in series inside the box. With an 8.4 volts, fully charged then Juxta V2 is mechanical and is addressed to vapers who have already mastered this type of box and its functioning. It is advised to use coils equal or superior to 0.28 Ω. 

Top box !

At the top of the Juxta V2 Titane box you will find a connection for atomisers of 24mm in diameter. A connection dotted with aeration vents to dissipate the heat. You will also find the famous magnetic repulsion switch. Equipped with a pair of neodymium magnets, the switch is lockable and is comfortable.

Put in place your Juxta V2 Titane Pro-MS

  • Only use identical and fully charge batteries (flat top) and in good condition.
  • Unscrew the connection (superior top-cap)
  • Screw the atomiser to the 510 connection
  • Insert the batteries
  • Screw the atomiser and top cap on the tube
  • Unlock the switch and the mod is operational.

Features of the Juxta V2 Titane :

Dimensions  96 x 24 x 49 mm Batteries 2 x 18650
Material Brass / Titan Connection  510 / 24 mm

The Juxta V2 Titane Pro-MS Mod is made in France by Wheels & Time.

The Juxta V2 Titane Pro-MS Mod is delivered with:

  • 1 Juxta V2 mod
  • 1 Signed authentication certificate
  • 1 Long screw
  • 2 Replacement magnets
  • 2 wraps Wheels & Time
  • 1 Utilisation notice

Discover the Packaging of the Juxta V2 Titane Pro-MS

Questions/Customer response on.

Do you wish to ask a question? One of our experts or customers will respond to you.

We have received your request and we thank you for it. You will receive an e mail confirming your question.