Quake 3.0 Full Engraver Mod L'Atelier


119,90 €
High End
0%
Ajouter à
ma liste
Une question
sur ce produit?
partager
ce produit
Je partage ce produit

Vous pouvez maintenant coller l'url de la page

-18 If you do not smoke, do not vape
119,90 €
next available
Notify me when available
Vos avantages
si vous achetezce produit
1€ offert tous les
10€ d'achat
11€ offert sur votre
prochain achat
Loyalty points for this product : 11
Loyalty points already in your cart : 0
Loyalty voucher amount* : 11,00 €
(*) Available on your next order
La livraison express est offerte !
votre commande chez vous Mercredi !

The Quake 3.0 Full Engraver by L’Atelier is a meca mod, compact and functions with the 18650 battery. The Swiss Modders at L’Atelier proposes this mod composed in brass and delrin. The tube of the mod, benefits with a superb cerakote finish (Cerakote Ceramic Coatings) resistive and durable. And for this edition, Full Engraver has precise engravings.

The Quake 3.0 Full Engravings mod is compact, 74mm in length and agreeable in the hand. It is completely flush with atomisers 25mm in diameter. The 510 connection is 100% hybrid. The Quake 3.0 Full Engraver has a lateral switch, sized in the length of the mod. A blade which has contact at the base of the tube.

The utilisation of the Quake 3.0 Full Engraver is intuitive with a very short switch stroke: 0.5 mm. A light, elegant and robust meca mod.

The Quake 3.0 Full Engraver Mod is made in Switzerland by L’Atelier

Batteries Non Included.

Features
Height 74 mm
Width 26 mm
Diameter 25 mm
Weight 83 g
Thread Hybrid
Material Brass/Delrin
Battery 1x18650
Origin Switzerland
Material reserved for informed public A Mechanical Mod destined for experts with excellent knowledge in Ohm law It is strongly advised to use this type of product with:

Des résistances ayant une valeur supérieure à 0,20 ohm

Des accus de qualité et en parfait état de fonctionnement

 QUAKE 3.0 FULL ENGRAVER MOD L'ATELIER

Présentation du Mod Quake 3.0 Full Engraver L'Atelier

The Full Engraver of the Quake 3.0 offer splendid engravings with cerakote paintings. With several patterns of choice.

Compact and light the Quake 3.0 Full Engraver is a meca mod which allows you to vape with atomisers of a good size, up to 25mm in diameter. It also has a hybrid connection and addresses expert vapers. All in brass, it is also made in robust cerakote: Cerakote Ceramic Coating, including the engravings in this edition.

The asset of the Quake 3.0 Full Engraver mod is particular connection which can be found on the length of the tube. Sized in the body of the mod, a strip connects to a socket on the base of the mod. This original position of the switch offers a different type of vape and is more intuitive.

Association of the Quake 3.0 Full Engraver Mod L'Atelier with the  Dead Rabbit V2 RTA

Cerakote and engravings 

Gravures du Mod Quake 3.0 Full Engraver L'Atelier

The tube of the Quake 3.0 Full Engraver benefits with a ceramic base paint which is ultra-resistive. Cerakote is very trendy in the world of high-end mods. This coating is not only robust, but it also supports strong heat. An ideal product for vaping. The body of the corps and the 510-hybrid connection is in brass. The inner socket is in Delrin.

Flush at 25 mm

Connexion du Mod Quake 3.0 Full Engraver L'Atelier

The Quake 3.0 Full Engraver mod is agreeable and light. The small size offers strong and intuitive utilisation. 74mm long and a diameter of 25mm, the Quake 3.0 Full Engraver has a connection which is entirely “flush” with atomiser 25mm in diameter maximum. The hybrid connection must be used with adapted atomiser which means a long connection pin.

Blade switch

Switch du Mod Quake 3.0 Full Engraver L'Atelier

The interesting particularity of the Quake 3.0 Full Engraver is the lateral connection on the length of the tube. Sized in the body of the mod, the tip of the strip is in contact with the socket on the base of the mod. A new way to vape which becomes comfortable and intuitive. It is advised NOT to press on the end of the strip in absence of the socket.

Features of the 3.0 Full Engraver :

Dimensions du Mod Quake 3.0 Full Engraver L'Atelier

Dimensions 74 x 26 mm Material Brass/Delrin
Diameter Connection 25 mm Battery 1 x 18650
Weight 83 g Connection 510 hybrid

The Quake 3.0 Full Engraver mod is made in Switzerland by L'Atelier.

Discover the Packaging of the Quake 3.0 Full Engraver 

Packaging du Mod Quake 3.0 Full Engraver L'Atelier

questions/réponses de clients sur Quake 3.0 Full Engraver Mod L'Atelier

Vous souhaitez poser une question ? Un de nos experts ou de nos clients vous répondra.

Nous avons reçu votre demande et nous vous en remercions. Vous allez rapidement recevoir un mail pour confirmer la publication de votre question. Celle ci sera visible après modération et notre communauté vous apportera une réponse en suivant.

Regardez dans votre boite mail, pour valider votre question