This website is ruled by the French legislation and age restriction on Ecig and nicotine. If your are not legally able to purchase ecig or nicotine products in the state or country where you live, please do not enter this site.
Following the success of the last DotStick Kit, Dotmod proposes the DotStick Tank Clearomiser. It has a reservoir with a capacity of 2ml and is delivered with 2 DotStick coils in 0.4 and 1.0 ohm. The DotStick tank has been worked on, gold plated connections and offers an orientated vape towards a tight pull or an aired pull depending on the coil used and selected aeration. You will find the know how and careful design signed by the American manufacturer DotMod.
The DotStick clearomiser disposes of a genius filling with a piston filling. Changing of the coils have been studied to make it easier for the vaper. Note: the DotStick is also compatible with the Nord by Smok coils: Nord Regular, Ceramic, Mesh).
Find the know how of the American brand DotMod with the DotStick tank clearomiser. It is axed towards to an MTL and restrictive DL. On the diameter side, the DotStick Tank is 22mm and can be mounted on a plethora of boxes and other mods. The clearomiser has a cared for look and has been worked on, gold plated it is sensation on all levels.
Association of the dotStick Tank Dotmod Clearomiser with the Gen X Mod Vaporesso
DotMod design
The DotMod product is recognisable at first glance. The finishes, the refined work, the finishes are the strength of this American brand. You will find all the characteristics with the DotStick tank clearomiser. A simple but elegant design, gold plated coating, a beautiful transparent bell makes this a unique piece.
Optimised airflow
The DotStick tank has an adjustable airflow ring at the base which regulates the aeration. A choice of pull which can be from aired to a tight. You will find your preferred pull gracious to the precise airflow ring.
Adapted capacity
The DotStick Tank Clearomiser has a 2ml tank. This can seem light to begin with, but it is orientated towards MTL, restrictive pull which is enough for a good few hours of vape without the worry of filling. Note: the reservoir us made in robust PCTG and is perfectly transparent.
Filling of the dotStick Tank :
Press lightly on the base of the clearomiser towards the bottom
Turn it towards the right and remove the base of the clearomiser
Insert the pipette of the e liquid into the opening of the reservoir
Replace the base of the clearomiser by turning the reservoir towards the right.
Whistle Drip Tip
The dotStick clearomiseur offers a choice of pull from tight to air. Indirect inhaling (MTL) to direct inhaling (RDL) with a ring which regulates the opening of the aeration. The dotStick clearomiser is equipped with the new whistle drip tip to refine the aromas.
DotStick Coils
With the dotStick clearomiser you will find:
A coil in 1 Ω, 10 to 15 watts, is made for a semi-direct. Ideal with a medium rate of nicotine.
A coil in 0.4 Ω which produces vapor and boosts flavours. It allows you to obtain a power of 20W (Soft), 24W (Medium) and 27W (Strong).
You can use e liquids with a medium or high rate of PG. The coils have no screw thread for easy, rapid, and clean installation in the clearomiser.
The dotStick clearomiser is equally compatible with the coils of the Nord range by Smok, Nord Regular, Ceramic and Mesh. A vast choice of coils.
Replacing the coils of the DotStick Tank :
Presser légèrement la base du clearomiseur vers le bas
Tourner la vers la droite et retirer la base du clearomiseur
Retirer la résistance usagée
Insérer une résistance neuve au centre du clearomiseur, dans le réservoir et appuyer fermement dessus
Attendre quelques minutes l'amorçage complet de la résistance.
Press lightly on the base of the clearomiser towards the bottom
Turn it towards the right and remove the base of the clearomiser
Remove the used coil
Insert the new coil into the center of the clearomiser, into the reservoir and press firmly
Wait a few minutes so the coil is a completely soaked with e liquid
- Pour plus d’informations sur les caractéristiques du contrôle des avis et la possibilité de contacter l’auteur de l’avis, merci de consulter nos CGU
- Aucune contrepartie n’a été fournie en échange des avis
- Les avis sont publiés et conservés pendant une durée de cinq ans
- Les avis ne sont pas modifiables : si un client souhaite modifier son avis, il doit contacter Avis Vérifiés afin de supprimer l’avis existant, et en publier un nouveau
- Les motifs de suppression des avis sont disponibles ici
1
1
3
4
61
12345
Trier l'affichage des avis :
A. Anonymous
publié le 29/11/2023
suite à une commande du 15/11/2023
5/5
Rachat suite à la casse du premier que j avais (de ma faute). J'en suis satisfaite, le tirage, les saveur et la durée de vie des résistances sont au top pour moi
P. Sebastien
publié le 13/10/2023
suite à une commande du 04/10/2023
5/5
Un très bon tank. Super qualité dommage qu'il et arrivé jaune et non le royal blue que j'ai commandé. Rien de grave l'erreur et humaine. Je donne quand même 5 étoiles au petit vapoteur.
M. Charley
publié le 08/09/2023
suite à une commande du 31/08/2023
5/5
"
P. Ludovic
publié le 08/08/2023
suite à une commande du 31/07/2023
5/5
"Parfait aux attendus"
N. Ľubomír
publié le 10/07/2023
suite à une commande du 01/07/2023
5/5
"Work perfect, very nice"
T. Fabrice
publié le 05/07/2023
suite à une commande du 24/06/2023
5/5
"Très beau produit, très bon rendu de saveur, conforme à mes attentes"
D. Hervé
publié le 21/04/2023
suite à une commande du 10/04/2023
4/5
"En essai actuellement très beau pas évident a ouvrir pour accéder au chargement du liquide au départ ,ne consomme pas de trop je conseille"