Zlide D24 Clearomiser - Innokin

118
Reviews
24,90 €
Choix de l'equipe
0%
Ajouter à
ma liste
Une question
sur ce produit?
partager
ce produit
Je partage ce produit

Vous pouvez maintenant coller l'url de la page

-18 If you do not smoke, do not vape
- +
24,90 €
Vos avantages
si vous achetezce produit
1€ offert tous les
10€ d'achat
2€ offert sur votre
prochain achat
Loyalty points for this product : 2
Loyalty points already in your cart : 0
Loyalty voucher amount* : 2,00 €
(*) Available on your next order
Plus que 5,00 € pour que la livraison soit offerte !
Nous expédions votre commande en 24h !

The Zlide D24 Clearomiser by Innokin is made for a perfect balance between flavour and vapor. The Zlide D24 is the big brother of the Zlide 22mm, which is adapted for most of the actual boxes and procures the best autonomy of vape. The clearomiser accepts MTL coils, as well as low based coils for the production of vapor and increased flavours.

The Zlide Clearomiser is the third collaboration by Innokin with the reviewers Phil Busardo and Dimitris Agrafiotis. The Zlide D24 has all the assets of the Zenith Clearomiser, as a rapid replacement and practical coil, filling from the sliding top cap and child security. The design remains sober and elegant.

The Zlide D24 Clearomiser is compatible with the Zenith Coils, it is delivered with coil of 1.20 ohm which is perfect for a vape in MTL, but also accepts low based coils like the Z-Plex 3D in 0.48 ohm. A polyvalent atomiser has a good capacity of 4ml for optimal comfort of vape.

The Zlide Clearomiser is made by Innokin.

Features
Height 46.23 mm
Diameter 24 mm
Capacity 4 ml
Type of Vape Indirect Inhaling
Filling Par le haut
Coil Zenith

 ZLIDE D24 CLEAROMISER INNOKIN

Présentation du Clearomiseur Zlide D24 Innokin

The Zlide D24 is a clearomiser which has been thought of by 2 large names in vape: Phil Busardo and Dimitris Agrafiotis. It takes the features of the Zenith by bringing a touch of MTL with a 4ml Tank which allows you vape during a long moment.

Contrary to the Zenith, it is entirely removeable for easy cleaning and changing the tank. The filling is effectuated by the top assures good sealing and has child security.

It is adapted to e liquids with nicotine salts with a 1.2-ohm coil but allows a vape with juices charged with Glycerine gracious to the compatible coils such as the Z-Plex 3D in 0.48 ohm which procures more vapor by keeping the beautiful flavours.

See above the Zlide D24 Innokin is associated with the iStick Rim Box

Actual Design

Clearomiseur Zlide D24 du Kit Zlide Tube Innokin

Well built, like a knight in modern times, the Zlide D24 Clearomiser by Innokin will not leave you any indifferent. Beautiful polished steel, small visor in the form of a helmet, the Zlide D24 does not need to envy his cousin the Zenith.

With a diameter of 24mm and a capacity of 4ml allows the Zlide D24 to adapt to all boxes and mods and to also have a good autonomy of vape.

Easy Filling

The Zlide D24 is filled by sliding the top cap, after having unscrewed the drip tip. This leaves to discover a large window to easily insert you e liquid in the tank of 4ml. This system allows good child security to avoid any leaks or accidents.

Integrated Filling

The Zlide D24 Clearomiser is entirely removeable for simple and efficient cleaning. It is simple enough to remove 2 small screws from the top cap to separate all the elements of the clearomiser. Think about regularly cleaning the Zlide for optimal comfort of vape.

Filling of the Zlide Clearomiser :

 

  • Unscrew the drip-tip
  • Push the top cap towards the back
  • Fill the 4ml reservoir
  • Close the top cap
  • Put on the drip tip
  • Wait a few minutes so the coil is perfectly soaked with your e liquid for the first utilisation.

Changing the Coils of the Zlide

To change the coil of the Zlide D2, it is simple enough to place it in the tank. No need to screw it in.

Installation of the Zlide D24 Clearomiser Innokin :

  • Unscrew the base part of the Zlide D24 Clearomiser under the connection pin.
  • Slide the new coil in the notches
  • Screw back on the inferior part of the clearomiser  

Features of the Zlide D24 :

Height 46.23 mm avec drip-tip Capacity 4 ml
Diameter 24 mm Coils Zenith
Material Steel/ Glass Drip-Tip 510

The Zlide D24 Clearomiser is made by Innokin.

The Zlide D24 Clearomiser is delivered with:

Contenu Clearomiseur Zlide D24 Innokin

  • 1 Zlide Clearomiser
  • 1 Z-Plex3D de 0,48-ohm Coil
  • 1 Coil 1,20 ohms
  • 1 Changeable Reservoir
  • 1 Supplementary Drip Tip
  • 1 Detached Pieces Kit
  • 1 Utilisation Notice

Discover the Packaging of the Zlide D24 Innokin

Packaging Clearomiseur Zlide D24 Innokin

4.8/5
Calculé à partir de 118 avis client(s)
Voir l'attestation de confiance

Avis soumis à un contrôle

3
1
0
12
102
1 2 3 4 5

Trier l'affichage des avis :

  • N. John
  • publié le 24/09/2020
  • 5/5
Excellent!
  • D. Peggy
  • publié le 24/09/2020
  • 5/5
Aucune fuite ! je ne vapote qu'avec celui-ci
  • H. Sabrina
  • publié le 24/09/2020
  • 5/5
Bon produit et facile à utilisation
  • G. Jordan
  • publié le 19/09/2020
  • 4/5
Correspond à ce que j’ai demandé
  • L. Rodrigue
  • publié le 09/09/2020
  • 5/5
Super
  • D. Nicolas
  • publié le 03/09/2020
  • 5/5
Très bon produit, les ajustements respire (
  • R. Jean-François
  • publié le 03/09/2020
  • 5/5
Le Zénith en version démontable, dont on peut donc éviter l'encrassement progressif, avec le même rendu de saveurs.
  • G. Dominique
  • publié le 30/08/2020
  • 5/5
  • D. Guillaume
  • publié le 27/08/2020
  • 5/5
Correspond parfaitement au descriptif, parfait
  • H. Romain
  • publié le 27/08/2020
  • 5/5
clearo Innokin rien a dire fonctionne très bien et super pratique
More reviews...
questions/réponses de clients sur Zlide D24 Clearomiser - Innokin

Vous souhaitez poser une question ? Un de nos experts ou de nos clients vous répondra.

LAETITIA
15/09/2020
comment changer le réservoir en verre
Bonjour, j'ai cassé le réservoir en verre de ma zlide tube, j'ai un réservoir de rechange mais je ne vois pas comment on peu le changer Je vous remercie par avance laetitia ferrière
Expert LPV
15/09/2020
Bonjour, Vous pouvez retrouver la procédure du changement de pyrex (réservoir) directement sur la fiche produit du réservoir de rechange.