Nautilus Clearomiser Aspire

The Nautilus Aspire clearomiser is a legend in vape offering a full experience of simple utilisation. It is convenient for vapers who desire tight pulls, with maximum vapor and using less power. The Nautilus can hold up to 5 ml in e liquid which gives you several hours of vape without having to recharge the tank so often. 

The Nautilus Aspire is a reference in its domain and you will not be disappointed by its performance which has left a mark as soon as it appeared on the vaping market.

Association of the Nautilus Clearomiser with the  iStick Pico Eleaf Box

Air flow control

The ring found at the base of the Aspire Nautilus adjusts the air intake in the clearomizer for a light or tight draw. There are 4 positions:

• Position 1 (Ø 0.9 mm): tight draw
• Position 2 (Ø 1.1 mm): medium draw
• Position 3 (Ø 1.4 mm): light draw
• Position 4 (Ø 1.8 mm): very light draw

The more “aired” or free the pull is, the more vapor is produced

Performant coil system

Its Aspire Nautilus BVC technology is made up of two parallel coils capable of generating warm vapor in extremely high quantities, a powerful hit and an exemplary restitution of flavours.  Its innovative structure lets you use all types of e liquid from the classic 80/20 PG/VG to the highly viscous 100% VG and stops the e liquid from climbing up the central tube. 

Screwed at the base (side screw thread), the coil is always well-supplied with e-liquid. It is easily replaced without having to empty the tank of e-liquid. The tank itself is well-sealed to avoid leakage. Included with 2 Nautilus BVC coils in 1.8 and 1.6 ohms.

Advice: The BVC coil is made to be used around 7 to 12 watts.

Changing the coil of the Nautilus Aspire:

• Unscrew the tank
• Unscrew the Aspire Nautilus BVC from the base
• Screw a new coil back onto the base
• Fill the tank with e-liquid 
• Screw the base with the new coil back onto the tank.
• Prime the new coil

Pyrex reservoir with large autonomy

The reservoir of the Aspire clearomiser is in Pyrex and has a large capacity of 5 ml for your e liquid and does not conserve any tastes after cleaning. It allows you to use the Nautilus for long moments of vape without regular filling of e liquid. You can always keep an eye on the level of your e liquid even with the engravings.

Filling of the Nautilus Clearomiser :

• Unscrew the tank from the base 
• Incline the tank at 45° and pour the e-liquid along the inner face. Do not get any e-liquid in the central tube.
• Screw the base back on (by placing the Aspire Nautilus BDC squarely onto the central tube)  
• During the first fill, prime the coil: inhale several times while plugging the air inlet, (the hole at the bottom of the base) in order to draw the liquid in the atomisation chamber. Without priming, you'll notice a burnt taste (coil heating up without e liquid).
• Screw onto your battery

Features of the Nautilus Aspire Clearomiser :

The Nautilus Aspire Clearomiser is included with:

• 1 Aspire Nautilus 5ml Pyrex Reservoir
• 1 Aspire Nautilus BVC 1.6 Ω
• 1 Aspire Nautilus BVC 1.8 Ω
• 1 eGo cover ring no screws