Melo 4 D25 Clearomiser - Eleaf

Presentation Photo of the Melo 4 D25

After the enormous success of the 2 and 3 versions by Melo, Eleaf comes back on the scene with a new Clearomiser. The brand Melo 4 takes numerous elements which has been successful with the previous models, by welcoming the product. It benefits with the new performant coils, filling system and optimized airflow. The Melo 4 D25 is one of the 2 versions Melo 4. It has a 4.5ml capacity and is 25 mm in diameter. 

Polyvalent

Airflow of the Melo 4 D25

The two large arrivals of air situated under the base of the Melo 4 D25 Clearomiser offers you an aired pull, ideal for the utilisation in direct inhaling. It is therefore possible to regulate the airflow gracious to the swivel adjustament ring

New Filling System

Filling of the Melo 4 D25

On the filling side, there is no need to unscrew the top part of the Clearomiser with the Melo 4 D25. This model is dotted with a sliding hatch allowing you to fill the reservoir without any worries or spilling the e liquid. With 4.5ml in capacity, the Melo 4 D25 offers good autonomy on e liquid. 

 Choice of Coils

New Coils EC2

The Melo 4 D25 Clearomiser also has new coils. Named EC2 by Eleaf, the coils are the ameliorated version of EC Heads. Associated in Kanthal and Organic Cotton, they offer alot more performance with the rendering of flavours and the production of vapor. 2 x EC2 coils are supplied with the Melo 4 D25. 

• EC2 0.30 ohm: to be used from 30 and 80 watts
• EC2 0.50 ohm: to be used from 30 and 100 watts

The Melo 4 D25 is equally compatible with the Clearomiser Coils of the brand Melo and certain Coils from the brand Aspire. You have a choice. 

Features of the Melo 4 D25 Clearomiser :

The Melo 4 D25 Clearomiser is made by Eleaf.

The Melo 4 D25 Clearomiser is delivered with:

Composition Pack of the Melo 4 D25

• 1 Melo 4 D25
• 1 EC2 0.30 ohm Coil (pre-installed)
• 1 EC2 0.50 ohm Coil
• 1 Set of Changeable Joints
• 1 Notice

Filling the Melo 4 D25 Clearomiser

• At first use of a new coil, you must initiate the coil EC2
• Push the top part of the Clearomiser
• Fill the tank with e-liquid pouring the liquid into the small hole
• Place the top back into place
• Let the Clearomiser stand for about 5 minutes before vaping.

Changing the Coil of the Melo 4 D25 Clearomiser

• Unscrew the base of the Melo 4 D25 Clearomiser.
• Unscrew the coil from the base.
• Screw in the new coil.
• Initiate the new coil.
• Screw back on the base.