The Cubis Pro is a simple, reliable and excellent clearomiser. The 4ml tank allows a long vape and its compatibility as a whole with the BF Joyetech coils permits a large choice of vape. The new airflow system gives a more tightened pull like the first model from Cubis and the filling by the top "Top Filling" to avoid any leaking of liquids. The Cubis Pro Clearomiser is a good tool to peacefully evolve in the world of vape.
The Cubis Pro Clearomiser is simple to use. Once you have chosen your coil, the filling by the top and the aeration is simple to regulate. In contrary the first generation of the clearomiser, the leaking of liquids can be avoided. The 4ml tank is hermetic with an airflow situated at the top of the Cubis Pro, containing the liquid inside the tank.
Top Tank Filling & Top Airflow
The filling of the liquid is effectuated at the top of the Cubis Pro by unscrewing the top. The air passes by 2 small round openings. This system is very smart and assures an excellent flux of air for a good production of vape. It equally avoids the risk of any liquids leaking due to its location on the top of the clearomiser.
The Coil: A Crucial Choice
The choice of the coil is very important, as each one proposes a type of vape which must correspond to your preferences and needs. The Cubis Pro is supplied with 4 coils which you can test:
LVC Clapton 1.5Ω MTL: The new Clapton Coil dotted with a value which allows you to regulate the incoming of liquid to the coil (Liquid Valve Control). The LVC Clapton coil has a value of 1.50Ω for a vape and direct inhaling (Mouth to Lung). The valve opens depending on the viscosity of your liquid. For a liquid 50% in VG, the valve is opened to the maximum level.
Notchcoil 0.25Ω DL:A Coil with new technology, the Notchcoil in 0.25Ω for a vape with direct inhaling (Direct Lung). A powerful vape with many flavours and a coil to be used between 30W to 70W.
BF SS316 0.50Ω DL: For a classic vape, in subohm but more soft, to be used between 15W and 30W. Compatible with all modes VW/Bypass/Temperature Control in the SS mode. Direct inhaling (Direct Lung). For a good production of vape, direct or indirect inhaling.
QCS Notchcoil: This new coil is a Notchcoil where the Cotton Fiber can be replaced. This coil is re-useable.
The Cubis Pro Clearomiser is also compatible as a whole with the BF coils by Cubis made by Joyetech:
BF SS316 1.0 ohms, a coil in Stainless Steel of 1.0 ohms for the Temperature Control setting in Stainless Steel, and Variable Watts. To be used with a wide range of utilisation from 10W to 25W. For a tighter pull. Perfectly adapted for beginners.
BF Clapton 1.5 ohms, to be used uniqually in the Classic watts mode. To be use with a wide ange of utilisation from 8W to 20W. A coil orientated with an intermediate pull and flavour.
BF Ni200 0.20 ohms. A coil adapted for the Temperature Control on Ni Mode.
4/5
5/5
5/5
4/5
