Kanger T2 clearomizer

You found cheaper on another website ?
- +
4,20 €

From 10 euros of products purchased,obtain fidelity points which can be transformed for a reduction card when purchasing your next order.
10 euros = 1 Fidelity Point
1 Fidelity Point = 1 euros reduction
0.00 € offert sur votre prochain achat
Encore 29,90 € pour profiter des frais de port gratuits

The Kanger T2 is a well-known clearomiser in the world of Electronic Cigarettes. It produces a warm/hot vape and disposes of a 2.4ml tank with the filling from the top.

Find the coils of the Kanger T2 on this page

The Kanger T2 clearomiser is made by Kangertech.


Height 72 mm
Diameter 15 mm
Capacity 2,4 ml
Type of Vape inhalation indirecte

Kanger T2

The Kanger T2 is the most celebrated of all clearomisers by Kangertech for the Electronic Cigarette. With the coil situated at the top of the clearomiser, the Kanger T2 produces a warm/hot vape. The filling is effectuated from the top with the 2.4ml capacity tank. 

The thread of the Ego's type adapts on all Ego batteries. 

To preserve the coil, it is advised not to exceed 3.9 volts.

See above the Kanger T2 associated with a  spinner 900.

Features of the Kanger T2 clearomiser :

Size with Drip Tip 72mm Diameter 15 mm
Type of Vape Warm/Hot Type of Thread Ego
Capacity 2.4ml Weight


The Clearomiserr Kanger T2 is made by Kangertech.

Advice on filling the Kanger T2 Clearomiser:

1- Unscrew the tip

2- Fill directly the graduated tank with e-liquid

3- Screw back on the tip

4- Lay down the Clearomiser T2 for a few minutes

5- Screw the Clearomiser T2 to your Battery

Changing the coil of the Kanger T2 Clearomiser:

To replace the coil, it is simple enough to unscrew the tip and unscrew the coil, for it to be replaced with a new one depending on your preference.

The more the coil is low, the heating of the coil will be more important, and by consequence the hit and volume of vape will increase.  

Optimal Voltage following the coil:

    • 1,8 ohms : 3,2 to 3,7 volts
    • 2,5 ohms : 4,2 volts to 6 volts

Maintenance of the clearomiser Kanger T2 :

To clean the Kanger T2 clearomiser it is simple enough to:

  • Unscrew the graduated tank
  • Unscrew the central atomiser from the inferior cap
  • Rince the external pieces with soapy warm water
  • Rince the external pieces with clear water
  • Leave to dry
Product Reviews
  • Number of Reviews : 1057
  • Average Grade : 4.6 /5
  • T. Alain
  •  the 21/09/2017
  • 5/5
très bien
  • T. Paul
  •  the 20/09/2017
  • 5/5
  • R. Michel
  •  the 18/09/2017
  • 5/5
  • P. Antony
  •  the 18/09/2017
  • 5/5
Très bien, conforme à mes attentes
  • M. Marie
  •  the 11/09/2017
  • 3/5
bon produit un peu cher !
  • B. Lambolez
  •  the 07/09/2017
  • 5/5
conforme à mes attentes
  • L. Christian
  •  the 04/09/2017
  • 5/5
Très bien
  • J. Maud
  •  the 29/08/2017
  • 5/5
ma commande a été respectée et les cadeaux de bienvenue font plaisir
  • T. Ludivine
  •  the 23/08/2017
  • 5/5
  • G. Bernard
  •  the 19/08/2017
  • 5/5
Produit acheté auparavant chez détaillant, 30% moins cher sur le site. Je n'utilise que ce système peut être ringard, mais je n'aime pas les clears avec résistances peu fiables à mon goût avec trop d'effets secondaires, fuites etc...
More reviews...