This website is ruled by the French legislation and age restriction on Ecig and nicotine. If your are not legally able to purchase ecig or nicotine products in the state or country where you live, please do not enter this site.
With the Limax Kit Innokin, it associates the famous clearomiser, Zenith 2 with ah small simple box, beautiful and full of autonomy. The Limax Kit is a simple electronic cigarette, also simple to use and ideal for vaping with a large number of e liquids for beginners in vape.
The Zenith 2 Clearomiser proposes in effect a tight pull, close to a classic cigarette. This second version proposes an open aeration and a coil of 0.3 ohm to produce vapor with more power. The Zenith 0.8-ohm coil is also included in the kit, perfect for e liquids with a high rate of nicotine, nicotine salts and CBD. The Zenith 2 has a 5.5ml reservoir which allows you a longer vape and filling from the top of the very practical clearomiser.
The Limax box has excellent autonomy with the 3000 mAh battery. A battery which is of a small size and can be rapidly recharged with the USB-C cable. The Limax box does not bother with tedious settings and allows you to vape with an output power of 6 to 60 watts.
For a vape in indirect inhaling (MTL) and tight pull or for even an open vape, the Limax Kit is polyvalent, less clutter and efficient for a daily vape. The Limax Kit is compatible with the Z Coils by Innokin.
Innokin proposes a superb electronic cigarette for vaping all day long! The Limax Kit and the Zenith 2 Clearomiser is also elegant as well as efficient. In a small metallic box, a battery of 3000 mAh for a vape between 6 and 60 watts. Very simple to use, the Limax box marries perfectly with the Zenith 2. The Zenith 2 clearomiser is one of the best atomisers on the market for easy utilisation and the rendering of flavours. In this second version, the vapor is not left out with an open aeration. The Limax is compatible with all the Z coils Zenith by Innokin.
The Limax Kit is included with the Z Coils in 0.8 Ω and 0.3 Ω. You can use e liquids with a high rate of nicotine or even nicotine salts and CBD. The second allows you to produce more vapor with e liquids with a lower rate of nicotine but rich in vegetable glycerine. The Limax Kit is also polyvalent to follow the needs of vapers.
Adding to this a reservoir with a good capacity of 5.5ml, as well as rapid recharge of the battery with a connection and USB-C cable, you will obtain one of the best electronic cigarettes of the moment.
To whom addresses the Limax Kit ?
The Limax kit is polyvalent and can be addressed to wide range of the public, beginners to the most seasoned lovers of fine flavours. The reputation of the Zenith 2 clearomiser is well established in this area. The Limax kit will satisfy a vaper in search of an electronic cigarette which allows an all day vape. With a battery of 3000 mAh and 5.5ml reservoir, the Limax Kit has serious assets. The Limax Kit by Innokin is an economic and accessible electronic cigarette for beginners in vape.
Limax Box
With less than 80 mm in height, the Limax box has a particular and elegant design. The performant battery of 3000 mAh remains particularly compact. Of a small size is appreciated for a vaper, anywhere. The Limax box also has a connection of a good size to associate other atomisers which have a diameter of 26mm, maximum.
A simplified interface
On the screen, the graphic interface is simplified to center all the energy of the battery to the needs of the atomiser. The Limax box offers the essential vape in watts from 6 to 60 watts. The electronic cigarette starts with 3 successive clicks on the switch. Pressing on the + or – buttons reverses the display. So you do not damage the coil, the power can be modified with the + or – button. To resume, a box which is extremely to use, convenient for all.
USB-C Recharge
The Limax box is modern with a connection (and cable) type USB-C. A rapid recharge is effectuated with a capacity of 1.7A. The screen indicates the charging level of the battery.
Zenith 2
The king of clearomisers for a tight vape, in indirect inhaling, the Zenith 2 proposes the Limax kit, for an experience in semi-direct inhaling (RDL) with the Z coil in 0.3 Ω. The Zenith is a simple atomiser, economic but also polyvalent. The Zenith 2 of the Limax Kit is compatible as a whole with the Z coils by Innokin.
MTL and RDL airflow
More versatile, the Zenith 2 clearomiser is equipped with a more open aeration which allows you to passe from an MTL vape (indirect inhaling) to a RDL vape (semi-direct). The pull is more open. You can adapt the pull to the type of e liquids used and the coil included. The Zenith 2 is convenient to e liquids with a strong rate of PG, nicotine salts or for those which have a high rate of VG, superior to 50%.
Clean filling
The Zenith 2 proposes a filling from the top with the top cap. The seal avoids the leaking of e liquids. The reservoir has and is a strong point of the clearomiser, a capacity of 5.5ml for a longer vape. Contraire to the first Zenith, the reservoir can be easily disassembled and is easier to replace the damaged glass.
Filling of the Zenith 2 :
Turn the top cap towards the right by the indicated arrows
Fill the reservoir of the Zenith 2
Turn the top cap towards the left to close it
If it is the first utilisation of a new coil wait at least 10 minutes, so the coil is completely soaked with e liquid
Z coils
The Zenith Clearomiser is included with 2 coils, MTL and RDL for different renderings. One coil in 0.8 Ω for a very tight vape in MTL another in 0.2 Ω adapted for a vape in RDL and good production of vapor.
0.8 Ω to be used from 15 to 18 watts.
0.3 Ω to be used from 30 to 40 watts.
Changing the coil of the Zenith 2 Clearomiser :
Unscrew the base of the clearomiser
Remove the used coil by pulling it towards you
Clip in the new coil
Screw back on the base to the clearomiser
After filling wait at least 10 minutes before vaping so the coil is completely soaked with e liquid