Vinci X 2 Pod Voopoo

2
Reviews
39,90 €
Shop's favorite
New
0%
Add to
my list
A question about this product ?
Share
this product
Je partage ce produit

Vous pouvez maintenant coller l'url de la page

-18 If you do not smoke, do not vape
- +
39,90 €
Your advantages
If you buythis product
1€ offered for every 10 € of purchase
3€ offered with your next purchase
Loyalty points for this product : 3
Loyalty points already in your cart : 0
Loyalty voucher amount* : 3,00 €
(*) Available on your next order
For standard delivery is offered ! For express delivery is offered from 45,90 €
Your order shipped today
3x Only 9.70€ left to pay 3x free of charge

Here is a modern, practical and performant electronic cigarette. Voopoo proposes the Vinci X 2 Pod. Under a metallic screen and agreeable in the hand hides sophisticated technology within close reach. The Vinci X 2 Pod proposes a vape in direct inhaling with adjustable aeration depending on your preference, and an output power of 5 to 80 watts.

The Vinci X 2 functions with the 18650 battery for a longer vape. You can either replace the battery or recharge the battery via the USB-C connection with the possible charging capacity of 5V/2A.

The Vinci X 2 has a screen which proposes 2 graphic interfaces of choice, and especially with 2 modes of vape: Smart or RBA. The Smart mode detects the value of the coil installed and proposes the adapted power, so the coil does not get damaged. The RBA mode leaves you the choice for power.

With the Vinci X 2, the Vinci 2 cartridge allows you to fill the 6.5ml reservoir and install the PnP coils. The coils in « sub ohm » made for vapor are included with the Vinci X 2 Pod: PnP-VM1 in 0.3 Ω and PnP-VM6 in 0.15 Ω, made in mesh will show you what the Vinci X 2 is made of. It is compatible with all the PnP coils made by Voopoo

The Vinci X 2 is made with a new coating, leaves no finger marks and is especially very elegant

The Vinci X 2 Pod is made by Voopoo.

Battery Not Included

Features
Height 121 mm
Length 29 mm
Width 27 mm
Capacity 6,5 ml
Material Zinc Alloys / PCTG
Type of Vape Direct
Battery 1 x 18650
Power 5W - 80 W

VINCI X 2 POD VOOPOO

Présentation du Pod Vinci X 2 Voopoo

Vest-seller by Voopoo, the elegant Vinci X Pod is back! More power, more capacity and important work made with materials and finishes of the Vinci X 2 is a real gem for direct inhaling and a good choice of airflow.

The Vinci X 2 Pod and the Vinci 2 cartridge offers excellent autonomy, 6.5ml reservoir and 18650 battery (not included) for a longer vape and 80 watts maximum output power. Battery failure? The Vinci X 2 Pod can recharge the battery via the USB-C connection and a possible capacity of 5V/2A. The cable is included.

The Vinci X 2pod proposes a TFT coloured screen with 2 graphic interfaces of choice. Two modes of vape, very simple to use, the Smart mode detects the coils used and proposes the adapted power.

To whom addresses the Vinci X 2 Pod ?

Prise en main du Pod Vinci X 2 Voopoo

For vapers who love direct inhaling and in need of autonomy in will be interested by the Vinci X 2 Pod which has a lot of interesting assets. A good capacity of 6.5ml, the possibility with the utilisation of the 18650 battery can be increased. The Vinci X 2 Pod is also a beautiful tool for vaping. The design and especially the materials and finishes have been reviewed at the top. The pod does not worry about shocks, dust and of course finger marks.

Elegant Pod

Design du Pod Vinci X 2 Voopoo

Discover the new Vinci X 2 Pod and you will surprised by the satin coating which is agreeable to touch. It is also resistive to shocks, dust, and finger marks. Surprising… the Vinci X 2 pod has agreeable rounded angles. It has a rectangular form which increases the consistent capacity of the 6.5ml reservoir instead of 5.5ml with the first Vinci.

A Battery pod !

Trappe à accus du Pod Vinci X 2 Voopoo

The Vinci X 2 functions with the 18650 battery (not included) which allows you a longer vape by rapidly changing the battery. In case of urgency, the USB-C is very useful, it can update the latest software of the GENE chipset and can also recharge the battery with a capacity which can reach up to 5V/2A.

Charge usb du Pod Vinci X 2 Voopoo

Graphic interface

Chipset du Pod Vinci X 2 Voopoo

The TFT screen in colour of the Vinci X 2 Pod is a touch bigger, 1.08-inches. It allows you to choose the graphic interface “iron” or “core”. You can change from one interface to another by pressing on the + and – simultaneously on the pod. It has a puff counter as well as all the usual information: power, power, impedance, voltage in volts, etc.

Two modes

 

Very interesting to protect the coil and to make it last longer, the Smart mode detects the installed coil in the cartridge. The pod recognises the maximum power, so it does not go over with the PnP VM1 0.3 Ω, for example, it has a range of utilisation from 32 to 40 watts. In the Smart mode it does not exceed 40 watts, simple. The RBA mode leaves you a choice of settings. You can pass from one mode to another by pressing on the + and – button simultaneously.

Giant cartridge!

Cartouche du Pod Vinci X 2 Voopoo

The Vinci 2 cartridge is compatible with all the PnP coils by Voopoo. The large reservoir can hold up to 6.5ml in e liquid, excellent capacity for a longer vape. The reservoir is transparent so you can survey the level of e liquid. The Vinci 2 cartridge has a flat tip for inhaling. The opening is large for good production of air. The cartridge is magnetically secure to the pod by the strong magnets.

Filling of the Vinci X 2 Pod Voopoo :

Remplissage du Pod Vinci X 2 Voopoo

  • Remove the cartridge of the Vinci X 2Pod
  • If this is first filling, install the coil in the correct place.
  • Delicately remove the silicone cap
  • Fill the reservoir
  • Close the silicone cap and place the cartridge in the Vinci 2 battery
  • If this is the first filling, wait around 10 minutes so the coil is completely soaked with e liquid

Aeration of choice

Airflow du Pod Vinci X 2 Voopoo

The Vinci X 2 Pod has a small control on the side which offers you the choice for the airflow. More open, more vapor. The Vinci X 2 Pod offers an aired vape, direct or semi-direct inhaling.

PnP coils

Résistances du Pod Vinci X 2 Voopoo

The Vinci X 2 Pod is compatible with the PnP coils by Voopoo. Two Subohm coils in mesh for vapor are included with the pod:

  • PnP-VM1 0.3 Ω, to be used from 32 watts to 40 watts
  • PnP-VM6 0.15 Ω, to be used from 60 to 80 watts.

Changing the coil of the Vinci X 2  Pod:

Changement de résistance du Pod Vinci X 2 Voopoo

  • Remove the cartridge of the battery
  • Unclip the used coil by removing it delicately
  • Reclip in the new coil by inserting it delicately
  • Place the cartridge in the battery
  • Wait 10 minutes before vaping so the coil is completely soaked with e liquid.

Features of the Vinci X 2 Voopoo :

Dimensions du Pod Vinci X 2 Voopoo

Dimensions 121 x 27 x 29 mm Power 5 watts - 80 watts
Material Alliage de zinc/PCTG Battery 1 x 18650
Range of coils 0.15 Ω - 3.0 Ω Coils PnP Voopoo

The Vinci X 2 Pod is made by Voopoo.

The Vinci X 2 Pod is delivered with the :

Contenu du Pod Vinci X 2 Voopoo

  • 1 Vinci X 2 Pod
  • 1 Vinci 2 cartridge
  • 1 PnP-VM1 0.3 Ω coil
  • 1 PnP-VM6 0.15 Ω coil
  • 1 USB-C cable
  • 1 Utilisation notice

Discover the Packaging of the Vinci X 2 Voopoo

Packaging du Pod Vinci X 2 Voopoo

5/5
Calculé à partir de 2 avis client(s)
Voir l'attestation de confiance

Avis soumis à un contrôle

0
0
0
0
2
1 2 3 4 5

Trier l'affichage des avis :

  • B. Christophe
  • publié le 17/06/2021
  • 5/5
mieux que la 1ere version ne fuit pas même en 50/50 écran plus lisible me paraît de bonne qualité a voir dans le temps
  • B. Anthony
  • publié le 15/06/2021
  • 5/5
Top, plus solide et plus pratique que le 1
Questions/Customer response on.

Do you wish to ask a question? One of our experts or customers will respond to you.

We have received your request and we thank you for it. You will receive an e mail confirming your question.