This website is ruled by the French legislation and age restriction on Ecig and nicotine. If your are not legally able to purchase ecig or nicotine products in the state or country where you live, please do not enter this site.
Le Petit Vapoteur proposes the DotStick Discovery Pack. The DotStick is an electronic mod which functions with the 18350 battery or even the 18650.Entirely secured, it proposes three powers "Soft", "Medium" or "Strong". The Discovery Pack proposes 2 batteries adapts to the DotStick Kit for vaping with the MXJO 18350 700 mAh. And of course the MC1 charger by XTar to assure perfect recharge of your batteries.
Et bien sûr le chargeur MC1 de XTar pour assurer un parfait rechargement de vos accus !
The DotStick Dotmod Kit offers a vape orientated towards indirect inhaling and semi-direct depending on the chosen aeration. In this kit is the DotStick Tank clearomiser accompanied with a mod and a reservoir which has a capacity of 2ml and DotStick coils of 0.4 and 1.0 ohm. The clearomiser is compatible with the Nord Coils by Smok (Nord Regular, Ceramic, Mesh).
The DotStick Dotmod is delivered with 2 tubes which allows you to choose the format of your e cigarette, long or short depending on your preferences of the moment. The 2 batteries of the pack allows you to immediately vape, all that is left to do is fill the clearomiser.
Our DotStick Discovery Pack allows you to discover the DotStick in 2 formats: small 18350 MXJO battery, or a long format 18650 with the famous Samsung INR 25R. The DotStick electronic cigarette is entirely equipped for vaping in indirect inhaling with a tight or an aired pull. All in a tube format.
The DotStick is also composed of the DotStick Tank clearomiser, modern and practical. With a capacity of 2ml, filling clean and sharp aeration, open or tight. The kit is delivered with 2 coils for two types of vape: DotStick 0.4 ohm and DotStick 1.0 ohm. The DotStick Kit is also compatible, with all types of Nord coils by Smok.
To whom address the Dotmod Kit?
Disposing of all the modern comforts of an e-cigarette of the moment, we can say that DotStick Kit addresses vapers who appreciate a precise vape and of taste no matter the level, beginner, or expert. Amateurs of vape in tight inhaling, indirect or a little bit open or aired, the DotStick offers a beautiful panel with the rendering of flavours and vapor. Simple to use, it offers autonomy brought by the 18650-type battery and compact sized battery in 18350.
DotStick Mod
We recognise the know-how and Dotmod style with the DotStick mod. Far from the meca mods, the DotStick is in effect entirely electronic (with all the usual protections) and functions with the 18350 or 18650 battery (non-included). Anodised aluminium, gliding and engraved switch are present on the DotStick for great pleasure.
Two Tubes
To pass from a short format (18350) to a long format (18650) an extension on the tube can be installed simply on the mod. In these 2 cases the diameter is in 22mm and can be installed on other atomisers to concoct other beautiful setups.
Original Connection
Dotmod innovates an original anti-grip 510 connection. This connection is made to avoid the atomiser to be to tight and to get stuck in the connection pin of the mod. A find that we would like to see everywhere…
Switch to LED
Five successive clicks and the DotStick is ready to vape. The famous engraved Dotmod switch has coloured LED which indicates the intense heating. Green for strong, blue for medium and red for soft. It has a maximum output power of around 12W with a coil in 1.0 ohm and output power of 27W with the coil in 0.3 ohm. To pass from one colour to another with 3 successive clicks:
The LED also indicates the charging level of the battery:
Green = 61%-100%
Blue = 21%-60%
Red = 1%-20%
Dry Protection
With the coils in SS316L, the chipset also assures the temperature control (dry burn protection). The mod detects the absence of e liquid which avoids dry hits and damaging the coil. The Dry Burn Protection is activated by default on the DotStick and functions with the coils constituted in SS316L.
DotStick Tank
The DotStick Tank has a reservoir made in robust PCTG. It has a capacity of 2ml. Dotmod have invented a genius filling system to have a waterproof clearomiser, without a removeable top cap to conserve the design of the clearomiser. The reservoir is equipped with a retractable button so you can insert the pipette of the e liquid bottle. The cap automatically closes once the filling is finished.
Filling of the DotStick Clearomiser:
Press lightly on the base of the clearomiser towards the bottom
Turn it towards the right and remove the base of the clearomiser
Insert the pipette of the e liquid into the opening of the reservoir
Replace the base of the clearomiser by turning the reservoir towards the right.
Choice of Inhalation
With a ring which adjusts the opening of the aeration, the DotStick Tank has a choice of pulls from tight to aired. With indirect inhaling (MTL) to direct inhaling. Two drip tips are also included with a long drip, special flavours, which refines the aromas.
DotStick Coils
A DotStick coil in 1.0 ohm is included for a vape in indirect inhaling. A coil in 0.4-ohm for more vapor and rendering of flavours. You can use e liquids with a medium or high rate of PG. The DotStick 1.0-ohm coils is ideal for vaping nicotine salt or CBD e liquids. The coils have no screws for a rapid and clean installation in the clearomiser.
The DotStick is equally compatible with the coils of the Nord range by Smok, Nord Regular, Ceramic and Mesh. A vast choice of coils...
Replacing the coils of the DotStick:
Press lightly on the base of the clearomiser towards the bottom
Turn it towards the right and remove the base of the clearomiser
Remove the used coils
Insert the new coil into the centre of the clearomiser, in the reservoir and press firmly on it
Wait a few minutes so the coil is completely soaked with e liquid
Features of the DotStick :
Dimensions in 18650
122 x 22 mm
Capacity
2 ml
Dimensions in 18350
92 x 22 mm
Range of Coils
0.25Ω-2.50Ω
Material
Anodized Aluminium /PCTG
Coils
DotStick/Nord
The DotStick Kit is made by Dotmod.
The DotStick Kit is delivered with:
1 DotStick Mod
1 DotStick Tank
1 18650 Extension
1 DotStick 1.0-ohm Coil
1 DotStick 0.4-ohm Coil
1 Long Drip Tip
1 Changeable Pieces Kit
1 USB Cable
1 Utilisation Notice
MXJO 18350 700 MAH BATTERY
This battery signed MXJO is compatible with the small mods, including the 18350 meca mods. The IMR chemical (Lithium and Manganese) is stable and has a capacity of 700 mAh. The flat head is adapted to a majority of mods of the moment.
Features of the MXJO 18350 700 mAh :
Dimensions
34.7 x 18.6 mm
Capacity
700 mAh
Chemical
IMR - Lithium-Manganese
CDM maximum y
10.5 A
Weight
21.3g
Voltage Nominal
3.7V
Type of Positive Pole
Flat (flat top)
Voltage Maximal
4.2V
The MXJO 18350 700mAh is made by MXJO.
Samsung INR 25R 18650
The Samsung INR 25R is of very good quality with an autonomy of 2500 mAh. Sized for power, they allow you to vape in complete serenity, if you respect the security rules. (see below). 1 x Samsung INR 25R is included in the pack.
Features:
Voltage: 3.7 V
Maximum voltage: 4.2 V
Minimum voltage: 2.5
Chemistry: Li NMC
Maximum discharge current: 35 A in burst mode
Continuous discharge capacity: 20 A
Flat top
Capacity: 2500 mAh
Length: 65 mm
Diameter: 18 mm
Weight: 44 g
XTAR MC1 Charger
Practical and light the charger MC1 Xtar can very easily be transported allowing you to recharge your batteries at all times.
The Charger MC1 Xtar proposes 3 intelligent charging steps:
TC (Trickle current): Low charge at the beginning.
CC (Constant current) : 500 mA on a constant charge.
CV (Constant voltage) : 4,2 V (<40 mA) final charge.
The charger MC1 Xtar can recharge deeply discharged batteries. The technology PWM (Pulse With Modulation) allows an intense curent charge fixed at 500 mA.
You can charge one battery at a time.
The charger Xtar MC1 is compatible with with all types of batteries: 10440 / 14500 / 14650 / 17670 / 18350 / 18500 / 18650 / 18700 / 26650
Technical Features :
Length : 9,2 cm
Width : 2,2 cm
Height: 2,5 cm
Weight : 20,7 g
Intelligence Charge : TC / CC / CV
Compatible with : Li-on and IMR batteries
Protection against reverse polarity
Protection against overheating
Recharge one battery at a time
LED Charge Indicator
Operating Temperature at 0 to 40°C
Xtar Brand
Safety Rules
Please follow these few indispensable rules, not only for your safety, but also to ensure a long lifespan for your batteries:
Never transport your batteries with other metallic objects or electrical conductors in your pockets or a bag, without protection: the simultaneous contact of the positive and negative posts of your batteries with metallic objects may provoke an uncontrolled discharge and short circuiting, leading to the emission of toxic gases, or quite simply an explosion... Best to choose a suitable travel case.
Try to spot any malfunctioning of accessories connected to your batteries as soon as possible. In particular, the coil that equips your rebuildable atomiser or clearomiser should be checked regularly: a coil that has lost all resistive capacity must not be used with your batteries.
La vidéo du site est très bien pour comprendre le fonctionnement.
S. Carval
publié le 16/04/2021
5/5
SUPER DOTMOD
H. Matthieu
publié le 09/04/2021
5/5
Compact, léger, classe et complet avec ses 2 résistances et accus qui permettent de tester la vape indirecte et directe. Parfait pour débuter surtout pour ceux qui ne connaissent pas les réglages watts par résistance. Difficile d'endommager une résistance avec ce kit.
C. Jacoby
publié le 09/04/2021
5/5
Une superbe Dotmod de bonne qualité
M. Laura
publié le 08/04/2021
5/5
Elle est super ! Je suis sur du reconstructible normalement mais je voulais une deuxième cigarette électronique plus petite avec un bon rendu saveur pour pouvoir la transporter plus facilement. Et c’est le cas ! Matériaux de bonnes qualités, elle est très petite, pas de fuites au niveaux des airs flows grâce au remplissage par le bas. J’ai également testé les résistances de Smok (nord mesh) mais celles de dot sont mieux à mon avis. En tout cas je recommande elle fait super bien son job !
M. Renaud
publié le 01/04/2021
4/5
Très content
C. Paloma
publié le 30/03/2021
5/5
Bon produit
C. Pascale
publié le 29/03/2021
4/5
Astucieux la possibilité d'adapter 2 types de batterie légère et très esthétique ne regrette pas cet achat
L. Claire
publié le 29/03/2021
5/5
Tout est dans le pack. Pratique car pas très grande
T. Stéphanie
publié le 22/02/2021
3/5
"Le remplissage me déçoit. Le concept est intéressant mais il est tout de même plus pratique de remplir vers le haut en ôtant ou décalant l'embout, plutôt que d'avoir à tout séparer. Le remplissage se fait vraiment lentement et je reste septique sur la durée de vie du système, celui d'appuyer avec une fermeture autonome. Le trou est trop étroit pour ne pas faire déborder le produit lors du remplissage. L'essuyage est nécessaire... Par ailleurs, l'accueil des deux batteries qui permet de choisir la grandeur de la cigarette est un selon nos besoins. L'utilisation est simple tant il n'y a rien à faire. Elle s'auto régule selon la résistance. A nous de choisir le tirage serré ou non en modulant. Cependant, à part une batterie indépendante, qui était le but de mon changement premier, j'avais la même qualité vapotage saveur et hit avec l'exceed, qui elle se remplissait facilement sans débordement."