This website is ruled by the French legislation and age restriction on Ecig and nicotine. If your are not legally able to purchase ecig or nicotine products in the state or country where you live, please do not enter this site.
The Rigel Kit by Smok is essential for direct inhaling. Electronic mod with an output power of 230 watts which functions with 2 x 18650 batteries (non-included). Delivered with the TFV9, the Rigel kit also proposes 2 V9 coils, in mesh 0.15 Ω. The capacity of the TFV9 is 6,5 ml.
The Rigel Kit id also a simple to use mod with unique modes of vap: in watts. The Rigel mod is made with light materials with a seductive figure and ergonomics. The Rigel Kit brings comfort to the vaper for a longer vape. The Rigel Mod is equipped with the USB-C connection to allow a rapid recharge and also updates the software of the box.
A complete kit for a vape in direct inhaling in complete simplicity.
The Rigel Kit is made by Smok.
Batteries Non-Included.
The utilisation of e liquid strong in vegetable glycerine (more than 70% in VG) is recommended with this type of material.
After a series of boxes with multiple functions, Smok comes back with a simple to use electronic mod which functions with 2 x 18650 batteries (non-included) and only mode of vape: in watts! Up to 230 watts and is delivered with the TFV9 clearomiser and V9 meshed coils. Surrounded with light materials with an ergonomic figure, the Rigel Kit is full of autonomy and the TFV9 can hold up to 6.5ml in e liquid. You can choose an e liquid with a high rate of (≥70%) in vegetable glycerine adapted to the TFV9 coils.
To whom addresses the Rigel Kit Smok ?
With such features, the Rigel Kit addresses vapers who love to vape in direct inhaling, the production of vapor and sensation strong in taste but also for those who need good autonomy. On this objective, Smok have created the Rigel Kit, light and ergonomic in comfort. With the coils in mesh for the production of vapor. A mod which works with 2 batteries and a clearomiser with a large capacity for e liquid. The Rigel Kit in these conditions is ideal for vapers who vape non-stop.
Rigel Box
In carbon fiber, flexible fiber and robust, the Rigel mod has an excellent hold in the land which associates with an ergonomic design. With a light mod, the comfort of vape is complete. A volumed switch which offers an intuitive vape.
The Essential
The Rigel box gets straight to the point with the watts mode which allows you to vape from 1 to 230 watts. All orchestrated with a chipset which handles 2 x 18650 batteries (non-included) simultaneously. A chipset which is reactive. It heats the coil on only 0.001 second.
The Rigel box recognises the coils from 0.10Ω to 2.50 Ω. A large screen which allows you to read the necessary information (value of coils, voltage and draw counter) with a graphic interface which propose 6colours of choice.
18650 Double Battery
There is a removeable and magnetic cap which you can install the 18650 batteries. The 2 batteries offer consequent autonomy and a good moment of vape. It also offers a recharge via the USB-C connection and has a maximum capacity of 2.0A.
TFV9 Clearomiser
Imposing, the clearomiser has a capacity of 6.5ml and a diameter of 28mm at the level of the base and 25.5mm at the base. The TFV9 clearomiser like all the TFV is sized for the production of vapor and strong sensations. To go through the concept, it is delivered with coils made in reactive mesh and has a V9 power of 0.15Ω. With flavours and vapor.
Beautiful Frame !
As all the TFV, the TFV9 sub ohm clearomiser has a large frame for a powerful vape. With a diameter of 28mm large than its reservoir, it has a capacity of 6.5ml. With 25.5 mm at the base will go without any problems on the 510 Rigel mod.
Aired
To optimise the production of vapor, the TFV9 clearomiser has a performant airflow system to limit the excessive heat. With an airflow ring situated at the base of the clearomiser, you can control the desired arrival of air. Even more it is open, more there is vapor.
Large Capacity
The filling of the TFV9 clearomiser is simple and secure. To open the 6.5ml reservoir, it is simple enough to lightly remove the top cap towards the top and turn to discover the large opening.
Filling of the TFV9 Clearomiser :
Lift the top cap of TFV9
Tilt the top cap towards the back
Fill the reservoir via the hole
Put the top cap back in place
V9 Meshed
With the Rigel, Smok has coils in mesh constituted in Kanthal, for a value if 0.15 ohm. Ideal for an aired vape, the TFV9 Meshes allows a vape of 40 to 90W for a maximum of vapor and flavours gracious to the reputed Mesh for an excellent rendering.
The TFV9 is also compatible with the different TFV8 baby coils by Smok, NRG GT Core or the HW Ello for a large choice of sensational vape.
Changing the coil of the TVF9 :
Unscrew the base of the TFV9
Unscrew the coil
Screw the new coil on the base
Screw back on the base
Fill the tank
Wait 10 to 15 minutes so the coil is soaked with e liquid
