This website is ruled by the French legislation and age restriction on Ecig and nicotine. If your are not legally able to purchase ecig or nicotine products in the state or country where you live, please do not enter this site.
Aspire the legendary manufacturer in electronic cigarette materials proposes the new Nautilus Prime. A light but compact pod gracious to the anodized aluminium coating which can easily slide into your pocket. The kit disposes of a 3.4ml cartridge and is compatible with the famous Nautilus BVC. You can also find a screen on the front which allows you to regulate the power up to 60 watts.
With the Nautilus Prime Pod, you will dispose of a 3.4ml cartridge which can be filled with your favourite e liquid. The recharge is done by simply by a small silicone strip at the back of the cartridge. Three positions for the airflow are available. From tight to aired. The settings are effectuated on the front of the mod.
The Nautilus BVC coils are also part of the Nautilus Prime. You will find a 2S 0.7Ω coil in mesh for powerful flavours and beautiful dense vapor. The second BVC coil in 1.8Ω procures a tight vape and is adapted to nicotine salt or high in nicotine e liquids.
The Nautilus Prime Pod propose a beautiful screen on the front, simple and intuitive. Several modes are available such as the Power (up to 60 Watts), in Bypass mode and to finish in Volt mode from 0.5 to 8V. The battery in 2000 mAh of autonomy is enough to vape all day long and a USB-C port is present for a rapid recharge of the pod.
A completely new design is proposed by Aspire with the new Nautilus Prime. The coating in anodized aluminium offers a simple and solid rendering for daily use. The battery of 2000 mAh, rechargeable via USB-C (cable included), for lightness which allows easy transport.
The Nautilus Prime also has a cartridge of 3.4ml o be filled with a liquid of your choice. It is compatible with the Nautilus BVC coils which have nothing to prove as they are used everywhere. It is delivered with 2 coils which are totally different, the first in 0.7 ohm for a semi-direct vape and a second 1.8 ohm for a tight vape. The arrival of air is adjustable on the front with 3 positions from tight to aired.
An OLED 0.69-inch screen is present on the front of the Nautilus Prime Pod. It allows you to choose 3 different modes: Power, Bypass or Volts. This pod has an output power of 60 watts or in 8 volts. The chipset is of course equipped with all the actual protections: short circuit, low voltage, overcharging of the battery etc..
To whom addresses the Nautilus Prime ?
The packaging of the Nautilus Prime and the features make it a real polyvalent pod which can be used for types of vapers. This is perfect for beginners, a coil in 1.8Ω in search of vapor can be completed with the second coil in 2S 0.7Ω.
The compact format of the Nautilus Prime pod is a good asset for a daily vape. Just like the battery which is rapidly rechargeable in USB-C. In search of a practical pod and easy to live with? Do not look anymore, you have found it.
Sober Look
The Nautilus Prime is covered with a beautiful anodized aluminium surface. This brings lightness and a very discreet design. The rectangular form and high position of the start button offers a very agreeable hold in the hand. And to crown all of this, the tip in Delrin is 510 standard is present, this allows you to add your preferred drip tip if you do not like the original.
Several modes
The chipset of the Nautilus Prime Aspire has 3 function modes which you can choose by pressing on the "+" and "-" buttons for a couple of seconds:
To set the power is simple via the 2 visible buttons on the front of the Nautilus Prime. You can also block the different power by pressing on the "+" for 2 seconds. The chipset is also capable heating you coil in 0.001 second.
Battery and Security
The Nautilus Prime electronic cigarette disposes of a battery which is 2000 mAh which is perfect for vaping all day long. The recharge is also very rapid (2A) gracious to the USB Type-C cable (included). You will also economise the battery by shutting down the screen with 3 consecutive clicks on the principal button.
The Nautilus Pod is charged with the actual protections: short circuits, overheating, low voltage, etc… For the extinction of the pod mod, it is not rocket science, 5 successive and rapid clicks on the start button.
Nautilus Prime Cartridge
With the Nautilus Prime you can fill 3.4ml in e liquid of your choice. It is compatible with the range of Nautilus BVC coils and is also with RBA bases (non-included). The airflow settings are effectuated on the front of the pod. Three positions are available to obtain to pull from tight to aired.
The cartridge of the Nautilus Prime is maintained by a magnetic system to prevent it from leaving the pod. The tip is in 510 standard format so you can add you preferred drip tip.
Filling of the Nautilus Prime:
Remove the cartridge from the Nautilus Prime
If it is the first filling, install the coil beforehand
Delicately remove the silicone cap
Fill the reservoir
Close the silicone cap and place the cartridge in the Nautilus Prime
If it is the first filling, wait at least 10-15 minutes before vaping so the coil is soaked with e liquid.
Coils of the Nautilus Prime
The Nautilus Prime Pods is delivered with 2 different but complementary coils which can be used depending on the moment:
Nautilus 2S 0.7Ω, to be used from 20 to 25 watts, for good production of vapor and intense flavours.
Nautilus BVC 1.8Ω, to be used from 10 to 14 watts, for balanced flavours and a tight pull.
An RBA coil (non-included) can also be used for the Nautilus Prime Pod. It allows you to go a little bit further in your customisation of vape, we advise you not to use coils under 0.3 / 0.4 ohm to avoid over heating
Changing the coils of the Nautilus Prime:
Remove the Nautilus Prime cartridge from the pod
Remove the used coil by removing it delicately from the base
Screw in the new coil and insert it into the cartridge
Replace the cartridge into the Nautilus Prime Battery
Wait at least 10 to 15 minutes before vaping so the coil is completely soaked with e liquid
Produit très pratique. Je l'utilise pour des produits à base de sel de nicotine et j'y trouve parfaitement mon plaisir de vape.
B. Claire
publié le 02/10/2020
5/5
Super petit pod que l’on peut emmener partout
G. Frederic
publié le 24/09/2020
4/5
fait son travail ras pour le moment
B. Claire
publié le 24/09/2020
5/5
Très contente
H. Guillaume
publié le 24/09/2020
2/5
Beaucoup trop aérien pour de la vape indirect, et elle chauffe. Habitué aux produits aspire, Nautilus 2 S, GT etc... Je pensais trouver le même rendu avec 1 pod plus pratique..
D. Jean-Yves
publié le 24/09/2020
5/5
Exactement ce à quoi je m'attendais. Il tient dans la poche, il fonctionne bien et il tient bien la distance.
L. Fabien
publié le 13/09/2020
4/5
Pod de secours quand je suis sur mon reconstructible. Fonctionne très bien avec la BVC 0,7 s mech. Compact et ergonomique, matériaux de qualité, écran oled et usb-c. Se fofile partout.
5/5
4/5
2/5
