This website is ruled by the French legislation and age restriction on Ecig and nicotine. If your are not legally able to purchase ecig or nicotine products in the state or country where you live, please do not enter this site.
With the DotStick, Dotmod renews a great classic of the electronic cigarette: in a format tube. With comfort and simple utilisation, the DotStick Kit is an electronic mod which functions with a 18650 battery or even 18350. Entirely secure, it proposes 3 different power modes "Soft", "Medium" or "Strong". The DotStick Tank is accompanies the mod with a reservoir in 2ml and DotStick coils of 0.4 and 1.0ohm.
The DotStick offers a vape orientated towards indirect inhaling and semi-direct inhaling depending on the coil and aeration used. In these 2 cases, the vape is precise and you will find the know-how Dotmod design (aluminium anodised, engravings), the care given to the DotStick. The filling and changing of the coil has been particularly studied to make life simple for the vapers. Note: the DotStick Kit is also compatible with the Nord Coils by Smok (Nord Regular, Ceramic, Mesh).
In a imitable style Dotmod offers vapers of all levels, beginners or expert, a unique and splendid electronic cigarette.
With the DotStick Kit is more than just an electronic mod that Dotmod proposes, but an electronic cigarette which is entirely equipped for vaping in indirect inhaling with a tight pull or an aired pull. Renewed in a format tube like in the days of the Petri Mods, Dotmod comes back with an electronic mod and functions with (of choice) a 18650 or even a 18350 battery (both batteries not included). With this latest you will appreciate the ultra-compact size with a setup which conserves all the potential of a kit.
The DotStick Kit is modular in size and is equipped with the DotStick Tank Clearomiser, modern and practical. With a capacity of 2ml, clean filling and sharp aeration, open or tight. The kit is delivered with 2 coils for 2 types of vape: DotStick 0.4 ohm and DotStick 1.0 ohm. The kit is also compatible with the Nord Coils by Smok.
The DotStick offers 3 power modes for the installed coils “Soft, Medium or Strong”.
To whom address the Dotmod Kit?
Disposing of all the modern comforts of an e-cigarette of the moment, we can say that DotStick Kit addresses vapers who appreciate a precise vape and of taste no matter the level, beginner, or expert. Amateurs of vape in tight inhaling, indirect or a little bit open or aired, the DotStick offers a beautiful panel with the rendering of flavours and vapor. Simple to use, it offers autonomy brought by the 18650-type battery and compact sized battery in 18350.
DotStick Mod
We recognise the know-how and Dotmod style with the DotStick mod. Far from the meca mods, the DotStick is in effect entirely electronic (with all the usual protections) and functions with the 18350 or 18650 battery (non-included). Anodised aluminium, gliding and engraved switch are present on the DotStick for great pleasure.
Two Tubes
To pass from a short format (18350) to a long format (18650) an extension on the tube can be installed simply on the mod. In these 2 cases the diameter is in 22mm and can be installed on other atomisers to concoct other beautiful setups.
Original Connection
Dotmod innovates an original anti-grip 510 connection. This connection is made to avoid the atomiser to be to tight and to get stuck in the connection pin of the mod. A find that we would like to see everywhere…
Switch to LED
Five successive clicks and the DotStick is ready to vape. The famous engraved Dotmod switch has coloured LED which indicates the intense heating. Green for strong, blue for medium and red for soft. It has a maximum output power of around 12W with a coil in 1.0 ohm and output power of 27W with the coil in 0.3 ohm. To pass from one colour to another with 3 successive clicks:
The LED also indicates the charging level of the battery:
Green = 61%-100%
Blue = 21%-60%
Red = 1%-20%
Dry Protection
With the coils in SS316L, the chipset also assures the temperature control (dry burn protection). The mod detects the absence of e liquid which avoids dry hits and damaging the coil. The Dry Burn Protection is activated by default on the DotStick and functions with the coils constituted in SS316L.
DotStick Tank
The DotStick Tank has a reservoir made in robust PCTG. It has a capacity of 2ml. Dotmod have invented a genius filling system to have a waterproof clearomiser, without a removeable top cap to conserve the design of the clearomiser. The reservoir is equipped with a retractable button so you can insert the pipette of the e liquid bottle. The cap automatically closes once the filling is finished.
Filling of the DotStick Clearomiser:
Press lightly on the base of the clearomiser towards the bottom
Turn it towards the right and remove the base of the clearomiser
Insert the pipette of the e liquid into the opening of the reservoir
Replace the base of the clearomiser by turning the reservoir towards the right.
Choice of Inhalation
With a ring which adjusts the opening of the aeration, the DotStick Tank has a choice of pulls from tight to aired. With indirect inhaling (MTL) to direct inhaling. Two drip tips are also included with a long drip, special flavours, which refines the aromas.
DotStick Coils
A DotStick coil in 1.0 ohm is included for a vape in indirect inhaling. A coil in 0.4-ohm for more vapor and rendering of flavours. You can use e liquids with a medium or high rate of PG. The DotStick 1.0-ohm coils is ideal for vaping nicotine salt or CBD e liquids. The coils have no screws for a rapid and clean installation in the clearomiser.
The DotStick is equally compatible with the coils of the Nord range by Smok, Nord Regular, Ceramic and Mesh. A vast choice of coils...
Replacing the coils of the DotStick:
Press lightly on the base of the clearomiser towards the bottom
Turn it towards the right and remove the base of the clearomiser
Remove the used coils
Insert the new coil into the centre of the clearomiser, in the reservoir and press firmly on it
Wait a few minutes so the coil is completely soaked with e liquid
Dot dans toute sa splendeur. Produit correspond à toutes mes attentes. Quelle légèreté et restitution des saveurs.
B. Romain
publié le 17/09/2020
5/5
Très bon produit simple à utiliser
B. Pascal
publié le 17/09/2020
5/5
parfait
L. Dominique
publié le 17/09/2020
5/5
un petit bijou de la vape rendu de saveur de haut niveau.
L. Daniel
publié le 16/09/2020
5/5
Au top
D. Christophe
publié le 16/09/2020
5/5
Une merveille ce Dotstick et le site toujours au top et rapide
C. Geoffrey
publié le 16/09/2020
5/5
Simple, beau (le royal blue de dotmod est le meilleur), super réactivité, système de remplissage ingénieux et changement de la résistance simple comme bonjour. Saveur au top. Toute les qualités de la Dotstick avec quelques plus.
B. Jean-michel
publié le 16/09/2020
5/5
Fonctionne très bien avec une bonne bouille je recommande
5/5
4/5
