ZENITH AEGIS MINI 2 KIT

Autonomy, accessibility and robustness, here is what resumes the strong points of the electronic cigarette, ideal for vaping everywhere. The Zenith 2 Aegis Mini 2 offers a vape full of finesse with a choice of pulls, closed or open which offers different sensations in indirect inhaling or direct. The kit allows you to vape longer with the ideal capacities. 

You will find a battery which can be rapidly recharged via USB-C and a capacity of 2500 mAh. A clearomiser which is a touch gourmet and has a capacity of 5.5ml for several types of e liquids, including those of nicotine salts and CBD e liquids (with the coils in 1.6Ω). The Aegis Mini 2 Box is also comfortable than robust and waterproof. To be sure that the electronic cigarette has been switched off (to avoid damage to the coil), the Aegis Mini 2 is also equipped with an interrupter on the side to entirely secure the electronic cigarette.

To whom addresses the Zenith Aegis Mini 2 ?

The Zenith 2 Aegis 2 Mini kit will please vapers who love tight pulls, indirect inhaling and who are in search of a clearomiser which is economical and has a good capacity. The kit and the Zenith 2 clearomiser will also please vapers who love a varied vape. The Zenith 2 and the coils are polyvalent and can be more aired. They are also adapted for e liquids with CBD or nicotine salts. It has a good capacity which is perfectly associated with the excellent autonomy of the Aegis Mini 2 box and the 2500 mAh battery. The kit offers a robust electronic cigarette and for those who vape in extreme conditions.

Aegis Mini 2 Box 

The Geek Vape M100 does not fear wear with a composition of steel, leather, and silicone. With a design inherited from the Aegis Mini, the mod is classed IP68, the famous “Tri-Proof” by Geek Vape which allows the mod to be waterproof, shockproof, and dustproof. Resistive to shocks and falls.

A lockable box

When the M100 Geek Vape box is not being used it can be turned off by a simply pressing on the button situated on the side. This interrupter is called “A-Lock” which locks the box and avoids accidental activation of the switch on the mod. You can slide the button towards the bottom to start the M100 box.

2500 mAh

With the GeekVape M100 box it offers excellent autonomy but also stable power which assures the charging level of the battery. At the top of the mod there is a USB-C connection which is protected by a silicone cap assuring the tightness of the mod. The recharge is rapid and the USB-C cable is included.

A polyvalent vape

The Geek Vape M100 accepts coils between 0.10 Ω and 3.0 Ω. It has a diameter of connection of 23mm in diameter. Three rapid clicks on the switch allows you access the menu f the mod. The box proposes several modes of vape:

• Varied power in watts up to 100W
• Bypass to reproduce a vape of a meca mod.
• Temperature Control (in SS, Ni200 and Titane)
• VPC mode to adjust at your convenience, the power of the mod during the puff.  

 Zenith 2 Clearomiser

Innokin have kept the figure of the Zenith, recognizable between others, in this 2^nd version. The difference is situated with the light bevel on the top cap and at the base, as well as a diameter of 26mm. It also has its proud allure, robust and compact with a height of 51.7mm. A real knight in modern times which inspires confidence.

A polyvalent airflow

The Zenith 2 is no longer purely a MTL clearomiser, it is dotted with a large window to pass in on turn for an aired pull inclusive of three little holes for a restricted vape. You can adapt you pull to any type of e liquid used and coil inserted. The Zenith is adapted to e liquids with a high rate of PG or nicotine salts or other e liquids which have a superior rate of 50% VG. 

Secured filling

The Zenith 2 proposes a filling from the top by turning the top cap. Closed by a lid to avoid any accidents or the risk of projections, you can insert the tip of your e liquid bottle. 

Filling of the Zenith Aegis Mini 2 Kit :

• Turn the top cap towards the right by the indicated arrows
• Fill the reservoir of the Zenith 2
• Turn the top cap towards the left to close it
• If it is the first utilisation of a new coil wait at least 10 minutes, so the coil is completely soaked with e liquid

Performant coils

The Zenith Clearomiser is included with 2 coils, MTL and RDL for different renderings. One coil in 1.6 Ω for a very tight vape and low power, and another in 0.8 Ω for a touch more vapor and high power.

• 0.8 Ω to be used from 15w and 18w
• 1.6 Ω to be used from 10w and 14w

Changing the coils of the Zenith Aegis Mini 2 Kit :

• Unscrew the base of the clearomiser
• Remove the used coil by pulling towards you
• Clip in the new coil
• Screw back on the base of the clearomiser
• After filling, wait 10 minutes so the coil is soaked with e liquid

Features of the Zenith Aegis Mini 2 :

The M100 Aegis Mini 2 Box is made by Geek Vape. The Zenith 2 Clearomiser is made by Innokin.

The Zenith Aegis Mini 2 Kit is delivered with:

• 1 Geekvape M100 Box
• 1 USB-C cable
• 1 Zenith Tank 2
• 1 1.6 Ω coil
• 1 0.8 Ω coil
• 1 Supplementary reservoir
• 1 Changeable pieces kit
• 1 Straight drip tip
• 2 User notices

Discover the Packaging of the Zenith Aegis Mini 2