This website is ruled by the French legislation and age restriction on Ecig and nicotine. If your are not legally able to purchase ecig or nicotine products in the state or country where you live, please do not enter this site.
The B100 Aegis Boost Pro is an all-ground pod by Geek Vape! Waterproof, shockproof and dustproof, the B100 Aegis Boost Pro has an excellent capacity of 6ml, compatible with the batteries type 21700. The pod allows you a longer vape and on all grounds.
The B100 Aegis Boost Pro is entirely made for a vape in direct inhaling, production of vapor and puts on value the flavours of your preferred e liquids. Aired but versatile, the pull of air is in effect adjustable with three possible aerations and is easily accessible.
With the P Series coils included, you can have a maximum output power up to 60 watts with the P0.4 Ω and 70 watts with the P 0.2 Ω coils. The B100 Aegis Boost Pro has a maximum output power of 100 watts, which can be used with other accessories and consumable by Geek Vape.
The B100 Aegis Boost Pro is in effect compatible with the Aegis Boost Plus and Aegis Boost Pro cartridges. It allows you to use the B Series Coils for a vast choice of possibilities and that is not all, the pod also accepts the RDTA cartridge and 510 Aegis Boost. It is possible to vape with a reconstructable atomiser.
The B100 Aegis Boost Pro can also function with the 18650 type batteries and can be recharge the battery installed with the help of the connection and USB/C cable, possible capacity of 5V/2A.
The B100 Aegis Boost Pro Pod is made by Geek Vape.
Geek Vape are always ready to do more, the Aegis Boost Pro Pod is proof! With the B100, the famous Aegis Boost Pro functions with the 21700 batteries. It is also compatible with all the accessories from the Aegis Boost Pro and Aegis Boost Plus: cartridges and 510 adapter for the utilisation with the atomiser.
The B100 Aegis Boost Pro Pod is an electronic cigarette for a vape in direct inhaling, for aired and adjustable pulls. The pod also offers robustness, waterproof, dustproof and shockproof, which has proven itself. It is also a pod which allows you a longer vape with a reservoir which has a capacity of 6ml and is also compatible with the batteries (not included) type 21700 to make the most of excellent performances.
To whom addresses the B100 Aegis Boost Pro Pod?
Classed waterproof (IP67), dustproof and shockproof, the Aegis Boost Pro Pod is convenient for all clumsy vapers, but also for those who are in need of a solid electronic cigarette. The B100 pod is also compatible with the 21700 batteries and the reservoir also has a good capacity which will please those in need of good autonomy. The B100 Aegis Boost Pro Pod is also an electronic cigarette for vapor and flavours, direct inhaling.
Resistance
Made in metal, leather and silicone, the B100 Aegis Boost Pro Pod is made to last. Certified waterproof, shockproof and dustproof, the B100 pod supports extreme conditions, but also shocks and falls. The pod is also made for an excellent hold in the hold with ergonomics which have been carefully worked on and is agreeable, without forgetting the TFT coloured 0.96-inch screen which displays the necessary information.
Power
With the B100 Aegis Boost Pro it has a maximum output power of 100 watts which is possible. With good autonomy with the utilisation of the 21700 batteries (not included). The pod is also compatible with the 18650 batteries with the help of the adapter and can be effectuated with the USB connection and USB-C cable.
Aired
A cartridge of 6ml in capacity is accompanied with the B100 Aegis Boost Pro Pod. The filling is practical as it can be effectuated via the exterior of the pod. The aeration is dotted with 3 openings which are adjustable for a vape 100% in direct inhaling. Vapor and clouds are present. The air control is also effectuated via the exterior with a practical wheel.
Filling of the B100 Aegis Boost Pro :
Tilt the silicone cap son you can access the filling hole.
Fill the reservoir
Place the cap back into place
If it is the first filling, wait at least 10 to 15 minutes so the coil is completely soaked with e liquid
P Series Coils
To have a good vape full of flavour and vapor, there are 2 coils constituted in mesh which are delivered with the B100 Aegis Boost Pro Pod:
P Coil 0.4 Ω, to be used from 50 to 60 watts
P Coil 0.2 Ω, to be used from 60 to 70 watts
Installing the new coil in the B100 Aegis Boost Pro Pod :
Press on the front button
Tilt the cartridge towards the back
Remove the used coil
Slide in the new coil into the reservoir
Install the cartridge
Wait 10 to 15 minutes so the coil is completely soaked with e liquid.
A polyvalent pod
The B100 Aegis Boost Pro Pod can be used with other compatible accessories. To use the B Series Coils by Geek Vape, the B100 Pod is compatible with the cartridge of the Aegis Boost Plus Pod. It is also compatible with the RDTA Cartridge and the 510 Aegis Boost Plus/Pro which allows to you install a reconstructable atomiser or clearomiser. The B100 Pod accepts coils inclusive of 0.10 Ω and 3.0 Ω.
Features of the B100 Aegis Boost Pro Pod:
Dimensions
121.90 x 33 x 49.17 mm
Power
5 watts - 100 watts
Material
Plastic/ Silicone / Leather / Zinc Alloys
Range of Coils
0.10 Ω - 3.0 Ω
Capacity
6 ml
Battery
1 x 21700/18650
Possible Charge
5V/2A
Coils
P Series Coils
The B100 Aegis Boost Pro Pod is made by Geek Vape.
The B100 Aegis Boost Pro Pod is delivered with:
1 B100 Aegis Boost Pro Pod
1 P 0.2 Ω coil
1 P 0.4 Ω coil
1 Supplementary drip tip
1 USB-C cable
1 Key
1 User notice
1 Detached pieces kit
Discover the Packaging of the B100 Aegis Boost Pro Pod by Geek Vape
5/5
4/5
